307 piston pin height

12 Port News - Features

12 Port History

Casting Numbers

Online Store

Tech Tips

Become a Member

Print Thread

Rate Thread

Re: 307 piston pin height Beater of the Pack #79447 03/03/14 02:29 AM
Joined: Sep 2008 Posts: 3,669 Likes: 42 N. Georgia CNC-Dude #5585 1000 Post Club
CNC-Dude #5585 1000 Post Club Joined: Sep 2008 Posts: 3,669 Likes: 42 N. Georgia	Found this data in a Sealed Power catalog that can be helpful. It lists(2) pistons as replacements for the 250. L2314F- C/H is 1.672,Flattop w/4 reliefs and a volume of -2.5cc and also a -.025" deck height. L2396F- C/H is 1.655, .073" dish and chamfer with a volume of -11cc Class III CNC Machinist/Programmer

Entire Thread
Subject	Posted By	Posted
307 piston pin height	intergrated j 78	02/18/14 10:09 PM
Re: 307 piston pin height	CNC-Dude #5585	02/18/14 10:36 PM
Re: 307 piston pin height	intergrated j 78	02/18/14 11:07 PM
Re: 307 piston pin height	CNC-Dude #5585	02/18/14 11:27 PM
Re: 307 piston pin height	Lifeguard	02/20/14 06:58 PM
Re: 307 piston pin height	CNC-Dude #5585	02/20/14 07:44 PM
Re: 307 piston pin height	Lifeguard	02/21/14 12:27 PM
Re: 307 piston pin height	Winter	02/21/14 06:02 PM
Re: 307 piston pin height	Lifeguard	02/21/14 08:39 PM
Re: 307 piston pin height	CNC-Dude #5585	02/21/14 08:51 PM
Re: 307 piston pin height	Lifeguard	02/21/14 09:12 PM
Re: 307 piston pin height	Lifeguard	02/21/14 09:19 PM
Re: 307 piston pin height	CNC-Dude #5585	02/21/14 09:55 PM
Re: 307 piston pin height	Lifeguard	02/21/14 10:13 PM
Re: 307 piston pin height	intergrated j 78	02/21/14 10:28 PM
Re: 307 piston pin height	CNC-Dude #5585	02/22/14 01:34 AM
Re: 307 piston pin height	intergrated j 78	02/22/14 10:11 AM
Re: 307 piston pin height	Lifeguard	02/22/14 01:43 PM
Re: 307 piston pin height	Beater of the Pack	02/22/14 02:17 PM
Re: 307 piston pin height	Lifeguard	02/22/14 05:11 PM
Re: 307 piston pin height	Beater of the Pack	02/22/14 06:23 PM
Re: 307 piston pin height	Lifeguard	02/22/14 07:03 PM
Re: 307 piston pin height	Beater of the Pack	02/22/14 09:05 PM
Re: 307 piston pin height	intergrated j 78	02/23/14 12:40 AM
Re: 307 piston pin height	Beater of the Pack	02/23/14 01:56 AM
Re: 307 piston pin height	intergrated j 78	02/23/14 01:33 PM
Re: 307 piston pin height	Beater of the Pack	02/23/14 01:59 PM
Re: 307 piston pin height	intergrated j 78	02/23/14 08:18 PM
Re: 307 piston pin height	Beater of the Pack	02/23/14 09:00 PM
Re: 307 piston pin height	Lifeguard	02/23/14 10:05 PM
Re: 307 piston pin height	tlowe #1716	02/24/14 12:36 AM
Re: 307 piston pin height	Lifeguard	02/24/14 05:21 PM
Re: 307 piston pin height	CNC-Dude #5585	02/24/14 07:36 PM
Re: 307 piston pin height	Lifeguard	02/24/14 07:39 PM
Re: 307 piston pin height	Tony P	02/25/14 12:22 AM
Re: 307 piston pin height	intergrated j 78	02/25/14 06:36 PM
Re: 307 piston pin height	Twisted6	02/25/14 07:54 PM
Re: 307 piston pin height	intergrated j 78	02/25/14 08:23 PM
Re: 307 piston pin height	moregrip	02/25/14 09:06 PM
Re: 307 piston pin height	Twisted6	02/25/14 09:25 PM
Re: 307 piston pin height	moregrip	02/25/14 10:12 PM
Re: 307 piston pin height	Lifeguard	02/25/14 10:21 PM
Re: 307 piston pin height	Beater of the Pack	03/02/14 06:54 PM
Re: 307 piston pin height	intergrated j 78	03/02/14 10:08 PM
Re: 307 piston pin height	Beater of the Pack	03/03/14 12:30 AM
Re: 307 piston pin height	CNC-Dude #5585	03/03/14 02:29 AM
Re: 307 piston pin height	Beater of the Pack	03/03/14 01:50 PM
Re: 307 piston pin height	intergrated j 78	03/03/14 09:21 PM
Re: 307 piston pin height	Beater of the Pack	03/04/14 01:09 AM
Re: 307 piston pin height	intergrated j 78	03/05/14 09:57 PM
Re: 307 piston pin height	Beater of the Pack	05/15/14 01:38 AM
Re: 307 piston pin height	intergrated j 78	05/17/14 03:29 PM
Re: 307 piston pin height	Lifeguard	05/17/14 06:27 PM
Re: 307 piston pin height	tlowe #1716	05/17/14 10:38 PM
Re: 307 piston pin height	intergrated j 78	02/22/14 06:19 PM

Moderated by stock49, Twisted6, will6er

Link Copied to Clipboard

Inliners International Forums General Discussion Hi Performance 307 piston pin height