|
Joined: Apr 2004
Posts: 3,556 Likes: 35
1000 Post Club
|
1000 Post Club
Joined: Apr 2004
Posts: 3,556 Likes: 35 |
Nice , little readouts. I have tried using the Igaging on one of my headshops. It was quick to hookup but has a hiccup in reading occasionally. I threw it away and bought a anilam unit.
Inliner Member 1716 65 Chevelle Wagon and 41 Hudson Pickup Information and parts www.12bolt.com
|
|
|
|
Joined: Oct 2007
Posts: 5,015 Likes: 47
1000 Post Club
|
1000 Post Club
Joined: Oct 2007
Posts: 5,015 Likes: 47 |
I like seeing what tools people have and how they adapt them for their use.
"I wonder if God created man because he was disappointed in the monkey?" Mark Twain
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
I threw it away and bought a anilam unit. That's baller status right there. A little overkill for what I do. MBHD
12 port SDS EFI
|
|
|
|
Joined: Sep 2008
Posts: 3,669 Likes: 42
1000 Post Club
|
1000 Post Club
Joined: Sep 2008
Posts: 3,669 Likes: 42 |
Here's the 3D Model Hank! What do you think?
Class III CNC Machinist/Programmer
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
Here's the 3D Model Hank! What do you think? I think that looks great! MBHD
12 port SDS EFI
|
|
|
|
Joined: Dec 2010
Posts: 535
Major Contributor
|
Major Contributor
Joined: Dec 2010
Posts: 535 |
Nice!
I bought some Pontiac "RAM AIR IV" hood decals for my car that I'm going to strategically cut to "RAM AIR VI". It'll mean a lot more when a turbo is bolted up, but I'm going to sport it before then =D Lucky me that Pontiac stopped at "RAM AIR V" with their performance packages.
Last edited by TheSilverBuick; 07/07/14 01:43 PM.
|
|
|
|
Joined: Sep 2008
Posts: 3,669 Likes: 42
1000 Post Club
|
1000 Post Club
Joined: Sep 2008
Posts: 3,669 Likes: 42 |
I'm going to machine these in aluminum for Hank and he is going to use them as fender badges on his Camaro. I had to alter a Z/28 emblem in a 3D model to get the scaling the same.
Class III CNC Machinist/Programmer
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
Here is a brass piece I made to fit in the oil gallery. It's a little rough but ehh! I made it so it can have an oil pressure gauge direct to it & read oil pressure while hood is open, then "T" off of it to feed my turbos separate oil filter & another to go to a oil pressure inside the car. MBHD
12 port SDS EFI
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
Setting up oil return for turbo. Had to machine the -10 billet drain fitting for a little bit better angle for the oil drain. Finding a spot in the oil pan for oil return fitting. Fitting installed. Here I used some chunks of billet for my intercooler mounting. Hollowed them out for lighter weight. MBHD
12 port SDS EFI
|
|
|
|
Joined: Oct 2007
Posts: 5,015 Likes: 47
1000 Post Club
|
1000 Post Club
Joined: Oct 2007
Posts: 5,015 Likes: 47 |
You are the bracket buildingest guy I know! That all looks good. I'm looking forward to seeing it all together and watching the videos of your kids driving it. Seriously, Great work.
"I wonder if God created man because he was disappointed in the monkey?" Mark Twain
|
|
|
|
Joined: Apr 2003
Posts: 1,537 Likes: 15
1000 Post Club
|
1000 Post Club
Joined: Apr 2003
Posts: 1,537 Likes: 15 |
Here's the 3D Model Hank! What do you think? It's a very sharp badge - but I don't get it . . . As I understand it Z28 started out as an RPO code for a 302 CI v-thingie for use in 305 CI limited SCCA events. It was so popular they began to badge cars that had the option. Similarly Z26 is an RPO code for a late 70s early 80s 'Rally' optioned Nova . . . Perhaps I am missing some back story here? regards, stock49
|
|
|
|
Joined: Sep 2008
Posts: 3,669 Likes: 42
1000 Post Club
|
1000 Post Club
Joined: Sep 2008
Posts: 3,669 Likes: 42 |
He wanted me to make it represent the inline 6 powerplant with the "6" in it instead of the "8".
Class III CNC Machinist/Programmer
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
You are the bracket buildingest guy I know! That all looks good. I'm looking forward to seeing it all together and watching the videos of your kids driving it. Seriously, Great work. Thanks Beater, my kids are 7&8 so by the time I get this Camaro running, they will be old enough. MBHD
12 port SDS EFI
|
|
|
|
Joined: Apr 2003
Posts: 1,537 Likes: 15
1000 Post Club
|
1000 Post Club
Joined: Apr 2003
Posts: 1,537 Likes: 15 |
He wanted me to make it represent the inline 6 powerplant with the "6" in it instead of the "8". OK . . . I follow that . . . even though the eight in Z/28 has nothing to do with cylinder count . . .
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
You could not get a Z/28 6 cylinder Camaro, it was only available with an 8 cylinder. I know that is not what it really means.Z/28 = V-8 car. Maybe I have a funny way of identifying my car having a 6 cylinder? I thought it is obvious, maybe not? As far as having a RAM AIR VI emblem, to me to is not as straight forward. Ponchos had RAM AIR III, IV's etc, so to me that was not as apparent, maybe I look @ things differently. 1977 Nova Rally - RPO Z26 Model Availability •Standard Nova hatchback - 1X17 •Standard Nova coupe - 1X27 Power Train Availability •250 L6 1V L22 •305 V8 2V LG3 •350 V8 4V LM1
MBHD
12 port SDS EFI
|
|
|
|
Joined: Apr 2003
Posts: 1,537 Likes: 15
1000 Post Club
|
1000 Post Club
Joined: Apr 2003
Posts: 1,537 Likes: 15 |
Maybe I have a funny way of identifying my car having a 6 cylinder? I thought it is obvious, maybe not? It wasn't obvious to me - but I was looking at the RPO numbers to literally . . . The Z/28 badge did call out a car that was built counter to the 'no replacement for displacement' mentality of that time. Your tweak to the badge is in the same spirit and will certainly get people to look under the hood . . .
|
|
|
|
Joined: Dec 2010
Posts: 535
Major Contributor
|
Major Contributor
Joined: Dec 2010
Posts: 535 |
The mid-80's "performance" Cavaliers were decal'd Z-24 with a four cylinder, so I think the 26 is pretty legit. They never made a Ram Air Six or 6-cylinder for that matter either =P
|
|
|
|
Joined: Dec 2010
Posts: 535
Major Contributor
|
Major Contributor
Joined: Dec 2010
Posts: 535 |
**Not exactly a nevermind, but the mid-80's ones came with a 6, the mid-90's ones came with a four, so I guess not quite equal. I'm not going to apologize for not exactly knowing that =P
|
|
|
|
Joined: Sep 2008
Posts: 3,669 Likes: 42
1000 Post Club
|
1000 Post Club
Joined: Sep 2008
Posts: 3,669 Likes: 42 |
Randal, this would look cool cast into the front of your timing cover where the fins are located or on top of your valve cover.
Class III CNC Machinist/Programmer
|
|
|
|
Joined: Dec 2010
Posts: 535
Major Contributor
|
Major Contributor
Joined: Dec 2010
Posts: 535 |
I'm more of the later Arrowhead type.
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
I got my SPA Turbo B.O.V. flange welded to a intercooler pipe so I mounted the valve. Thank you Douglas for the B.O.V.! Here is the tubing bender tool I borrowed. It is really nice & has roller wheels built in. Here is a used one: http://www.ebay.com/itm/Swagelok-MS-HTB-...=item4182e41c6a I also made some upper intercooler mounts w/titanium bolt. MBHD
12 port SDS EFI
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
External engine mounted oil pressure gauge. Mounted to brass piece I made. MBHD
12 port SDS EFI
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
Bent up a oil feed line to turbo oil filter housing. Turbo water line. Thermostat housing(aluminum), IIRC 1975 & newer passenger cars. Lightweight titanium bolt for power steering bracket. MBHD
12 port SDS EFI
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
12 port SDS EFI
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
I also got an oil catch can. BTW guys, I need to purchase some -12 (=3/4") flex hose for the catch can, anyone have a suggestion where to buy? I am just using push on connectors. Does not need to be stainless braided hose. Thanks. MBHD
12 port SDS EFI
|
|
|
|
Joined: Aug 2003
Posts: 1,905
1000 Post Club
|
1000 Post Club
Joined: Aug 2003
Posts: 1,905 |
Hank, Since you are in CA maybe these guys will be useful one day. I'm in Jersey and I use them because they ship fast and offer amateurs like me plenty of help. They are in Lawndale,CA. http://www.anplumbing.com/
Drew Mid-Atlantic Chapter
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
Thanks for the link Drew. MBHD
12 port SDS EFI
|
|
|
|
Joined: Sep 2005
Posts: 133
Contributor
|
Contributor
Joined: Sep 2005
Posts: 133 |
Nice work Hank. You obviously have some pretty good skills to carve out those metal parts. If you get bored, let me know. I can come up with lots of things you could build for my car. Paul
Last edited by McGoo; 08/21/14 04:58 PM.
V8 Camaros are like navels, everybody has one. 69 Camaro EFI Turbo 250 project is running!!
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
Nice work Hank. You obviously have some pretty good skills to carve out those metal parts. If you get bored, let me know. I can come up with lots of things you could build for my car. Paul Thanks Paul much appreciated. I am no machinist by any means, but I do like to play with my mill & lathe when I can. I never get bored, but I also never have enough time to work all the time on my Camaro. Now, since my boys are a bit older now I do have a lot more free time to work on my Camaro MBHD
12 port SDS EFI
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
I installed the mock-up engine in the Camaro to see if everything is going to clear brackets, mounts etc. The turbo oil return needs a different fitting, I am going to try & find a banjo fitting, it is tight between the frame & the turbos oil return fitting. Back to the drawing board. You can see the intercooler is installed, titanium bolts hold the upper tube brackets. I cut & mocked up my breather can hoses. I ordered the wrong color, I wanted black but ordered blue by mistake. I made a heater delete plate out of .080" aluminum. Lots of room w/the rack & pinion steering installed. I actually got one of my boys to help for a few minutes, hey,, it's a start! Turbo oil return hose hooked up. Had to modify Toms engine cradle, my 1.75" wastegate pipe would not clear. Now I will work on it while it is in the car & try to do more work. Then take it out, back & forth a few times. Now would be a good time to plumb some of the rack & pinion hoses & cooler. Still need to get a hydraboost set-up. http://www.hydratechbraking.com/GM_1stgenF_Body.htmlMBHD
12 port SDS EFI
|
|
|
|
Joined: Oct 2007
Posts: 5,015 Likes: 47
1000 Post Club
|
1000 Post Club
Joined: Oct 2007
Posts: 5,015 Likes: 47 |
Looking Good! Good to see your son out there. He's young. He'll be a big help before you know it and the next thing you know he'll be grown and gone.
"I wonder if God created man because he was disappointed in the monkey?" Mark Twain
|
|
|
|
Joined: Nov 2013
Posts: 482
Contributor
|
Contributor
Joined: Nov 2013
Posts: 482 |
In 2 weeks he will be old enough to drive, in 2 months he will be 30 years old. That Camaro is really getting close to running. I can't wait til it on the road. Jay 6155
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
I am still a long ways away. Money, is the biggest obstacle. I need upper & lower control arms, spindles, discs , calipers, lines etc.
Also need to modify my gas tank for an internal BIG pump., plumb the fuel system.
Interior needs to be gone through, head liner is just hanging down.
The rear end I want to change out. 4:10 gears are not ideal for my combo. Might be good for the 1/8 mile though.
Yet , need to install the 4L85E, get a torque converter, drive shaft made, need a trans cross member . Wheels, tires. Minor body work. All big plans, for a man w/a small budget.
I just wish Chip Foose & Chris Jacobs could overhaul my Camaro. MBHD
12 port SDS EFI
|
|
|
|
Joined: May 2005
Posts: 596
Major Contributor
|
Major Contributor
Joined: May 2005
Posts: 596 |
WE wish they would also, if that helps any.
Been there, Done that, Hope to live long enough to do it again. Big Bill I.I.# 4698
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
WE wish they would also, if that helps any. Thanks Big Bill, just need you guys to get a hold of Chip Foose & tell him I need an overhaul. MBHD
12 port SDS EFI
|
|
|
|
Joined: Jul 2000
Posts: 4,586 Likes: 20
1000 Post Club
|
1000 Post Club
Joined: Jul 2000
Posts: 4,586 Likes: 20 |
He wouldn't know what to do with a L6 Let along where to began LOL.
Larry/Twisted6 [oooooo] Adding CFM adds boost God doesn't like ugly.
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
OP
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
He wouldn't know what to do with a L6 Let along where to began LOL. That would be fine with me. I can take care of the engine department. I just need Chip Foose to do his magic to the rest of my 69 Camaro. I think that is his favorite model Camaro. Detroit Speed Quadralink mini tub, carbon fiber seats, big brakes, Ford 9" 35 spline gun drilled axles. The list goes on & on. MBHD MBHD
12 port SDS EFI
|
|
|
|
Joined: Aug 2013
Posts: 9
Active BB Member
|
Active BB Member
Joined: Aug 2013
Posts: 9 |
I've been reading here for years, never had a reason to post until now, so, here goes. Hank, where did you get that engine cradle? I need one bad for my OHC pontiac. Thanks, Sid
|
|
|
0 members (),
170
guests, and
29
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|