aha! I found it.
as per page 80 in the good book:
pressure plate: 40 ft.lbs with blue loctite.
flywheel: 1/2 in stock bolt, 110 ft.lbs
7/16 bolt, 90 ft.lbs, red loctite for both.
now I just need to know about the pressure plate to flywheel fasteners. do they need to be the ones with a shoulder, or can I use the plain jane types?
and how about washers on the flyweel fasteners? with loctite it seems like a plain grade 8 affair would be adequate.
