Hey fellas,I'm putting a 292 in place of a 250.I have a turbo 350 trans and all of this is in a 78 k-10 4x4.When I went from a 350 to the 250 the starter and flywheel worked.Now that Im putting in the 292 I've found that the starters bolt pattern is different....I went and bought a starter for a 292 and it still wouldn't bolt up for the flywheel seems to be just a little too big in diameter so I just ordered a flywheel for the 292.I hope this is the problem.......I had to drill the bolt holes in the 350 flywheel from seven sixteenths out to half inch to accept the 292 flywheel bolts.My question is have any of you ran into the same problem and is the flywheel different on the 292?The new 292 starter I boughts bolt hole pattern matches the block but the flywheel won't let it bolt up.....it lacks about a half inch in being able to bolt up.
Thanks in advance for any help.........Gerald
