Ok, I will try it again.
Just looked it up.
Application to buy starter for to get a PMGR starter, the good kind that has a nose cone and can be bought anywhere and works great.
for 153 tooth flexplates use 1995 Camaro with 350
for 168 tooth flexplates use 1996 Silverado with 350
To decide which flexplate you have. Look at your existing starter.
If the 2 mounting bolts are straight across it is a 153
If the bolts are staggered, it is a 168
Older engines that have 2 straight across bolts will most likely need to add the staggered hole. Simply bolt the starter on with 1 bolt and correctly align it up. peen the staggered hole location, drill and tap. Be cautious doing this. You need to be accurate.
Ah ok, not the 305 but the 1995 Z28 LT1 350. That makes more sense.
I'm working two businesses and 14 hour days this summer, I don't really have the free time to be upside down under my car drilling and tapping overhead. If I need a new starter this summer i will got with a stock replacement I guess.
