Using a 153 torque plate on a 250

12 Port News - Features

12 Port History

Casting Numbers

Online Store

Tech Tips

Become a Member

Print Thread

Rate Thread

Re: Using a 153 torque plate on a 250 Rjonah #97671 11/12/20 06:13 PM
Joined: Sep 2017 Posts: 86 Nevada R Rjonah OP Active BB Member
OP Rjonah Active BB Member R Joined: Sep 2017 Posts: 86 Nevada	I read an interesting thing... A person cut the top of a bad inline 6 block and turned it into a torque plate. I'm not looking to go that direction but I thought it a creative use for an, otherwise, piece of junk. Regards, Rick Inliners #6543

Entire Thread
Subject	Posted By	Posted
Using a 153 torque plate on a 250	Rjonah	11/10/20 04:24 PM
Re: Using a 153 torque plate on a 250	CNC-Dude #5585	11/10/20 06:37 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/10/20 06:51 PM
Re: Using a 153 torque plate on a 250	Twisted6	11/10/20 06:58 PM
Re: Using a 153 torque plate on a 250	panic	11/10/20 07:11 PM
Re: Using a 153 torque plate on a 250	THE FRENCHTOWN FLYER	11/10/20 08:38 PM
Re: Using a 153 torque plate on a 250	CNC-Dude #5585	11/11/20 12:03 PM
Re: Using a 153 torque plate on a 250	tlowe #1716	11/11/20 01:10 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/11/20 01:39 PM
Re: Using a 153 torque plate on a 250	CNC-Dude #5585	11/11/20 01:59 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/11/20 02:36 PM
Re: Using a 153 torque plate on a 250	THE FRENCHTOWN FLYER	11/11/20 07:45 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/11/20 02:49 PM
Re: Using a 153 torque plate on a 250	CNC-Dude #5585	11/11/20 02:52 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/11/20 03:08 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/12/20 10:24 AM
Re: Using a 153 torque plate on a 250	Beater of the Pack	11/12/20 02:32 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/12/20 03:19 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/12/20 03:28 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/12/20 06:13 PM
Re: Using a 153 torque plate on a 250	Twisted6	11/12/20 07:13 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/12/20 09:23 PM
Re: Using a 153 torque plate on a 250	tlowe #1716	11/12/20 10:30 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/12/20 10:52 PM
Re: Using a 153 torque plate on a 250	tlowe #1716	11/12/20 11:03 PM
Re: Using a 153 torque plate on a 250	panic	11/13/20 01:13 PM
Re: Using a 153 torque plate on a 250	Rjonah	11/13/20 02:02 PM
Re: Using a 153 torque plate on a 250	CNC-Dude #5585	11/13/20 02:30 PM

Moderated by stock49, Twisted6, will6er

Link Copied to Clipboard

Inliners International Forums General Discussion Engines Using a 153 torque plate on a 250