logo
12 Port News - Features
12 Port History
Casting Numbers
Online Store
Tech Tips
Become a Member
Previous Thread
Next Thread
Print Thread
Rate Thread
#8914 08/31/05 09:00 PM
Joined: Jul 2005
Posts: 7
P
prs Offline OP
Active BB Member
OP Offline
Active BB Member
P
Joined: Jul 2005
Posts: 7
Can anyone tell me what the compression should read on a 1950 216 chevy engine? The service manual says the comp ratio is a whooping 6.6:1 but doesn't say what the readings for a comp test should be. All six cyls.are read around 90. Thanks in advance.

#8915 08/31/05 10:27 PM
Joined: Dec 2000
Posts: 3,332
J
1000 Post Club
*****
Offline
1000 Post Club
*****
J
Joined: Dec 2000
Posts: 3,332
120 would be about perfect with engine warm. You'll find the info under Tune Up Specs in your manual.

If you have 90# your in great shape.


John M., I.I. #3370

"There are no shortcuts to any place worth going". -Anon
#8916 08/31/05 11:04 PM
Joined: Apr 2003
Posts: 1,541
Likes: 16
1000 Post Club
****
Offline
1000 Post Club
****
Joined: Apr 2003
Posts: 1,541
Likes: 16
Greetings . . .

90 PSI is a decent number for one of these old engines.

Measuring compression ratio with a PSI gauge depends on the starting the point (barometric pressure) - which is dependent on ambient temprature, engine temp, humidity and elevation with respect to sea level. At sea level with a steady barometer, one atmosphere is roughly 14.7 psi.

So if your car is sitting with a cold engine at sea level then your 90 PSI reading is about a 6:1 compression ratio - or six atmospheres. Spec would be just under 100 PSI. If, however, your car is sitting in Denver CO the starting pressure is lower so your CR would be higher with 90 PSI reading.

Here's an online pressure calculator that you can experiment with:
PSI to Atmospheres Converter

regards,
Keith


[Linked Image from 49fastback.com]
#8917 09/01/05 06:30 PM
Joined: Jul 2005
Posts: 7
P
prs Offline OP
Active BB Member
OP Offline
Active BB Member
P
Joined: Jul 2005
Posts: 7
Thanks for the responses. I feel better knowing that you both agree 90 is a decent reading for that motor. Thanks again....I appreciate it!

#8918 09/01/05 09:00 PM
Joined: Sep 2001
Posts: 510
D
Major Contributor
*****
Offline
Major Contributor
*****
D
Joined: Sep 2001
Posts: 510
The raw number is not as important as consistency. 90 on all six is jus' fine. 65 on one cylinder with 90 in the others, or significant variation (10 psi or more) in every cylinder, would indicate trouble.

God's Peace to you.

d
Inliner # 1450

#8919 09/01/05 09:35 PM
Joined: May 2000
Posts: 1,464
1000 Post Club
*****
Offline
1000 Post Club
*****
Joined: May 2000
Posts: 1,464
The absolute numbers are also highly dependent on engine cranking speed. Try checking compression on 6 volts and then on 12 volts and you will see what I mean. 90 seems good to me.


FORD 300 inline six - THE BEST KEPT SECRET IN DRAG RACING!

Moderated by  stock49, Twisted6, will6er 

Link Copied to Clipboard
Who's Online Now
0 members (), 125 guests, and 27 robots.
Key: Admin, Global Mod, Mod
Newest Members
Hairyclive, THarper, crash, ocean1907, Jabez House
6,816 Registered Users
Sponsored Advertisement
Sponsored Advertisement
This Space is Available
Powered by UBB.threads™ PHP Forum Software 7.7.5