Inliners International Forums General Discussion Engines NEED EXHAUST MANIFOLD FOR 292

Hi, i have a 1964 chevy C-10 P/U , and ever since i put a new 292 straight six in it i noticed the exhaust manifold was leaking, thinking it was a broken seal, i took off the manifold to find it was warped and cracked, and i have had a hard time finding a used one, whick would be preferred, so if you have any information,I would appreciate it a lot, thank you my Email adress is halfthree@aol.com PS if you know of any cheap new ones, that would be great,thanks

64,You might try the classified section,& parts wanted in the blue sidebar at the left of screen. Also there are several new & a used one on ebay Motors: parts & acessories- try chevy 292 exhaust manifold Search. Also some exhaust manifolds have different exit placement and size openings & # of bolts at exhaust exit flange. Some new replacement manifolds dont have the built in heat riser. Be sure to check for a match on these things. Good Luck.

Where are you located? I have some used ones, but depending on where you are located, the freight might be more than it's worth. Try Stevens Specialty Auto Parts. They have new manifolds and harmonic balancers. 1-800-443-2673
Hope this helps. Joe

Im in woodland washinginton about 40 miles north of portland, i appreciate all the info, thanks

I have seen new exhaust manifolds on ebay
Goodluck!
Hank

Is it the same manifold for a 250? If so I have one and I live alittle northeast of Seattle.

YES

Here is a NOS currently on ebay.
http://cgi.ebay.com/ebaymotors/NOS-GM-6-...1QQcmdZViewItem