Inliners International Forums General Discussion Engines need 292/250 kickdown pic

I'm swapping a TH350 for the powerglide in my '68 C10 with 292 and Monojet. The PG uses a linkage for the tranny kickdown, and the TH350 uses a cable. I need a picture of how the cable attaches to the carb. I need the bracket that mounts to the carb.

Will the bracket shown below work for my setup? It's from Classic Industries and is advertised as for all 1968-1969 TH350. Also, can I use a standard TH350 kickdown cable?



thanks, Eric

Mr. gasket makes a bracket so does Holley,Spectre, Moroso, and Russell . I know Russell has one that will hold the Throttle and Tranny cable for around 25 bucks or so In the Jegs Catalog Or check with them online Or Just hit up your local Parts House. Hope this helps
}[oooooo]

Unfortunately the ones I've seen are for 2 or 4bbl carbs. Mine is a Monojet. I'll guess I'll have to fab something up. That's why I would like a picture .