Oil, flat tappet cam failures, and what I learned

12 Port News - Features

12 Port History

Casting Numbers

Online Store

Tech Tips

Become a Member

Print Thread

Rate Thread

Re: Oil, flat tappet cam failures, and what I learned #12267 09/05/06 07:34 PM
Joined: Dec 2001 Posts: 48 Sheldonville, Mass OldCarKook OP Active BB Member
OP OldCarKook Active BB Member Joined: Dec 2001 Posts: 48 Sheldonville, Mass	I didn't clearly state that my shift away from gasoline engine oils to diesel engine oils is not just for break-in; I'm running diesel oils in ALL my vintage GMC motors. I sure do appreciate the warm welcome here and look forward to getting a better edumacation. While I've been in and out of the club for more than 10 years, my interest has peaked again in II. Rob English II Member #2141

Entire Thread
Subject	Posted By	Posted
Oil, flat tappet cam failures, and what I learned	OldCarKook	09/05/06 08:14 AM
Re: Oil, flat tappet cam failures, and what I learned	RevOD	09/05/06 08:33 AM
Re: Oil, flat tappet cam failures, and what I learned	John H. Meredith	09/05/06 09:42 AM
Re: Oil, flat tappet cam failures, and what I learned	Drew, II # 4211	09/05/06 10:06 AM
Re: Oil, flat tappet cam failures, and what I learned	bob308	09/05/06 10:15 AM
Re: Oil, flat tappet cam failures, and what I learned	Mike G	09/05/06 06:27 PM
Re: Oil, flat tappet cam failures, and what I learned	OldCarKook	09/05/06 07:34 PM
Re: Oil, flat tappet cam failures, and what I learned	SCRAPIRON, #4711	09/05/06 08:30 PM
Re: Oil, flat tappet cam failures, and what I learned	jimmy six #35	09/05/06 10:37 PM
Re: Oil, flat tappet cam failures, and what I learned	RevOD	09/06/06 05:14 AM
Re: Oil, flat tappet cam failures, and what I learned	Diesel Dan	09/06/06 05:55 AM
Re: Oil, flat tappet cam failures, and what I learned	OldCarKook	09/06/06 06:41 AM
Re: Oil, flat tappet cam failures, and what I learned	John H. Meredith	09/06/06 12:17 PM
Re: Oil, flat tappet cam failures, and what I learned	SCRAPIRON, #4711	09/06/06 05:57 PM
Re: Oil, flat tappet cam failures, and what I learned	OldCarKook	09/06/06 06:11 PM
Re: Oil, flat tappet cam failures, and what I learned	Mike G	09/06/06 06:49 PM
Re: Oil, flat tappet cam failures, and what I learned	Diesel Dan	09/06/06 07:25 PM
Re: Oil, flat tappet cam failures, and what I learned	John H. Meredith	09/06/06 07:27 PM
Re: Oil, flat tappet cam failures, and what I learned	SCRAPIRON, #4711	09/06/06 08:56 PM
Re: Oil, flat tappet cam failures, and what I learned	TP from Central PA	09/06/06 09:21 PM
Re: Oil, flat tappet cam failures, and what I learned	jimmy six #35	09/07/06 12:02 AM
Re: Oil, flat tappet cam failures, and what I learned	TP from Central PA	09/07/06 10:04 PM
Re: Oil, flat tappet cam failures, and what I learned	jimmy six #35	09/07/06 10:43 PM
Re: Oil, flat tappet cam failures, and what I learned	C-Dan-D-Luxe	09/08/06 10:25 AM
Re: Oil, flat tappet cam failures, and what I learned	Dennis	09/08/06 01:49 PM
Re: Oil, flat tappet cam failures, and what I learned	gonzo	09/14/06 12:54 AM

Moderated by stock49, Twisted6, will6er

Link Copied to Clipboard

Inliners International Forums General Discussion Engines Oil, flat tappet cam failures, and what I learned