|
Joined: Nov 2004
Posts: 420
Contributor
|
Contributor
Joined: Nov 2004
Posts: 420 |
11. Is Shell Rotella® T motor oil going to have less zinc in 2007? Yes. The API CJ-4 (next generation) Shell ROTELLA® T multigrade motor oil will have a slightly lower level of zinc than the current API API CI-4 PLUS Shell ROTELLA® T. Zinc is typically used as part of the anti-wear system within the oil. However, less zinc in API CJ-4 oils compared with API CI-4 PLUS oils does not mean increased wear. In fact, wear protection is one of the key areas where the API CJ-4 category provides improvements over API CI-4 PLUS. (Other areas include; oxidation stability and soot control). The new API CJ-4 Shell ROTELLA® T multigrade motor oil also meets the requirements of earlier API performance categories such as API CI-4 PLUS, CI-4, CH-4, CG-4, as well as others, and can be used in engines specifying any of these performance categories. at this address...... http://www.rotella.com/press/article_66.html SCRAP
Jerry Davis II#4711
ol Smokey said "one test is worth a thousand expert opinions."
|
|
|
Entire Thread
|
Oil, flat tappet cam failures, and what I learned
|
OldCarKook
|
09/05/06 08:14 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
RevOD
|
09/05/06 08:33 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
John H. Meredith
|
09/05/06 09:42 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
Drew, II # 4211
|
09/05/06 10:06 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
bob308
|
09/05/06 10:15 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
Mike G
|
09/05/06 06:27 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
OldCarKook
|
09/05/06 07:34 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
SCRAPIRON, #4711
|
09/05/06 08:30 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
jimmy six #35
|
09/05/06 10:37 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
RevOD
|
09/06/06 05:14 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
Diesel Dan
|
09/06/06 05:55 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
OldCarKook
|
09/06/06 06:41 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
John H. Meredith
|
09/06/06 12:17 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
SCRAPIRON, #4711
|
09/06/06 05:57 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
OldCarKook
|
09/06/06 06:11 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
Mike G
|
09/06/06 06:49 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
Diesel Dan
|
09/06/06 07:25 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
John H. Meredith
|
09/06/06 07:27 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
SCRAPIRON, #4711
|
09/06/06 08:56 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
TP from Central PA
|
09/06/06 09:21 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
jimmy six #35
|
09/07/06 12:02 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
TP from Central PA
|
09/07/06 10:04 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
jimmy six #35
|
09/07/06 10:43 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
C-Dan-D-Luxe
|
09/08/06 10:25 AM
|
Re: Oil, flat tappet cam failures, and what I learned
|
Dennis
|
09/08/06 01:49 PM
|
Re: Oil, flat tappet cam failures, and what I learned
|
gonzo
|
09/14/06 12:54 AM
|
|
0 members (),
102
guests, and
34
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|