Although i do not need the vacuum supply for the wipers or shift as that will supplied from the pump, answer me this if you will. If the center carb is metered why would the two outside carbs not have the same venturi vacuum. I am not running a progressive linkage so should not the vacuum be the same on all three carbs? Also ,if I'm taking the vac post the throttle plate what is the diff if i take it from the carb or the intake. The cam is a very,very, mild grind just a bit better then stock. Bored 30 over with 848 head and offy triple intake with corvette split exhaust. The stombergs are single barrels BXVD-35's part #380419. 2" exhaust through steel packs. Any suggestions and help to wrap the ole gray matter around the theory would be appreciated. Thanks.
