Al,
I have the same set up in mine.
If your fuse box has the flasher installed (if you have 12 circut or larger, you do) Then all you need is an off-on 2-wire toggle switch. If you have all the lights hooked up correctly to the fuse box, your parking lamps, tail lamps and turn indicators on the dash should flash when the toggle is switched. It will stay flashing until you toggle them off. The 2 wires from the switch should be connected to your plug that was provided. Then just plug it in the hazard position on the fuse box.
Really simple! I have a Iditit chrome column that has a hazard button like the OEM's.
Good Luck!
RapRap
1940 ChoppedChevyCoupe
Last edited by chopped 40; 02/27/09 06:39 PM.