Hey fellow Canuck! I did the same thing to my 65 C10 292...700R4 from a 92 305 truck. The starter and flexplate bolted on direct.I think I used new flexplate bolts from the dealer. The linkage for the tv cable was another story! It MUST work smoothly and travel very close to the specified distance between idle and wide open throttle. I am using the original carb and a homemade linkage given to me on an old intake from EFI-DIY (this site or Chevy-Talk) in Calgary. When the weather clears I can take a better look at mine to give you a decent description. At this point my shift points are a little high, but close enough to drive from Calgary to N.S. with a full load on board. Tom
