Should work, but I'll bet it's intended for lower static CR.
Delta or ? will have to get the last word on whether your existing lobe will take it - big cut off the base circle.
Your cylinders are also 60% larger than the subject engine (2 liter), so any cam will be much milder.
Remember to think 400 V8, not 300 L6 for the characteristics of the cam, valve size, CFM. etc. I always forget this!
Can you tolerate such high DCR?
The BHJ may not need anything at all done - I notice that the same SEMA damper is used for all Slant 6, despite 1" difference in stroke.
