|
|
Joined: Mar 2001
Posts: 272
Contributor
|
OP
Contributor
Joined: Mar 2001
Posts: 272 |
Reading Sonny's info on BarsLeaks in the 12 Port News made me wonder how many of you use it and what is your impression?
'38 Stude/292
|
|
|
|
Joined: Jun 2008
Posts: 48
Active BB Member
|
Active BB Member
Joined: Jun 2008
Posts: 48 |
I had to use it at the track last year. It worked well, but when I got radiator fixed, I flushed out the system a couple of times and eventually had to use lacquer thinner in order to clean out the radiator.
George #5355
|
|
|
|
Joined: Jun 2007
Posts: 1,411
1000 Post Club
|
1000 Post Club
Joined: Jun 2007
Posts: 1,411 |
George, I had to use that on my late model Dodge.
I've fixed the leak since then and I flushed the system 2 or 3 times (3 IIRC) and I'm getitng little rubbery balls of crud in the system.
Is that what you were getting (or similar)?
If so, the lacquer thinner got rid of it?
My, what a steep learning curve. Erik II#5155
|
|
|
|
Joined: Jun 2008
Posts: 48
Active BB Member
|
Active BB Member
Joined: Jun 2008
Posts: 48 |
Hi, Erik. That's exactly what I had in the system after using Barsleak, a lot of crud. Yes, the lacquer thinner did the trick but it didn't clear up everything the first time. I had to give the radiator another lacquer thinner cleaning out event. The coolant system's been normal ever since. Thankfully.
George #5355
|
|
|
|
Joined: Oct 2002
Posts: 787
Major Contributor
|
Major Contributor
Joined: Oct 2002
Posts: 787 |
That's an interesting problem. I'm wondering what causes that crud and if Barsleak is aware of it. Barsleak is one of the few additives(?) my Dad recommended. My Dad had been in Auto parts and service for thirty years.
Larry
Ignorance can be fixed Stupidity is forever
|
|
|
|
Joined: Mar 2001
Posts: 272
Contributor
|
OP
Contributor
Joined: Mar 2001
Posts: 272 |
Thanks guys, that is surely info to keep in mind.
'38 Stude/292
|
|
|
|
Joined: Mar 2005
Posts: 219 Likes: 3
Contributor
|
Contributor
Joined: Mar 2005
Posts: 219 Likes: 3 |
I haven't used Bars Leaks in quite a while but as I remember, there were little rubbery balls in the liquid.
Will6er
|
|
|
|
Joined: Mar 2004
Posts: 83
Active BB Member
|
Active BB Member
Joined: Mar 2004
Posts: 83 |
After reading Sonny's tip I added some to my '56. The guy that sold it to me said to open the heater all the way or it will stop up the core. I figured if the heater isn't on none will get to the core. What do you guys think. Will it migrate up the return side?
Charlie Hardin II #5039
|
|
|
|
Joined: May 2000
Posts: 1,464
1000 Post Club
|
1000 Post Club
Joined: May 2000
Posts: 1,464 |
It will probably clog up the heater control valve . I would do as directed.
FORD 300 inline six - THE BEST KEPT SECRET IN DRAG RACING!
|
|
|
|
Joined: Nov 2006
Posts: 24
Active BB Member
|
Active BB Member
Joined: Nov 2006
Posts: 24 |
Never use BarsLeak; it reacts to air in the system and will coat your radiator tubes, reducing efficiency. I always use AlumaSeal or CopperSeal, these products will not attach to your cooling system and will do a much better job of sealing any water or compression leaks.
|
|
|
|
Joined: Oct 2007
Posts: 5,041 Likes: 51
1000 Post Club
|
1000 Post Club
Joined: Oct 2007
Posts: 5,041 Likes: 51 |
A couple of years ago I read in a service bulletin that GM, Ford, and Chrysler put some Barsleak in on the assembly line. Beater
"I wonder if God created man because he was disappointed in the monkey?" Mark Twain
|
|
|
0 members (),
125
guests, and
27
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|