Yes I put it in a pan of 10w30 then preheat the over to 400-500 degrees let it sit there for 15-20 mins. It is also helpfull to put the cam in the freezer But Not realy needed. It can also be done with out the oil But I prefur to. Just lay the gear on a old cookie sheet. And I find useing welding gloves to handle the gear Once removed from the offen and have a friend Hold the cam while in the press. Another thing That is good to do is to Bolt the gear in place That way you don't have to worry about it EVER Walking off The cam. hope this helps }[oooooo]
God doesn't like ugly.
