Inliners International Forums General Discussion Engines spark lead, angle vs. time

Previous Thread

Next Thread

Re: spark lead, angle vs. time tom jennings #68536 02/12/12 06:37 AM Joined: Jul 2008 Posts: 183 Los Angeles tom jennings OP Contributor OP tom jennings Contributor Joined: Jul 2008 Posts: 183 Los Angeles (3.125" bore x 4.25" stroke, 6.85" rod length)

Entire Thread Subject Posted By Posted spark lead, angle vs. time tom jennings 02/11/12 08:45 PM Re: spark lead, angle vs. time stock49 02/12/12 12:07 AM Re: spark lead, angle vs. time tom jennings 02/12/12 02:39 AM Re: spark lead, angle vs. time tom jennings 02/12/12 06:37 AM Re: spark lead, angle vs. time strokersix 02/12/12 01:44 PM Re: spark lead, angle vs. time stock49 02/12/12 02:03 PM Re: spark lead, angle vs. time tom jennings 02/12/12 09:24 PM Re: spark lead, angle vs. time tom jennings 02/12/12 09:39 PM Re: spark lead, angle vs. time stock49 02/13/12 01:04 AM Re: spark lead, angle vs. time strokersix 02/13/12 11:02 AM Re: spark lead, angle vs. time Tony P 02/13/12 12:23 PM Re: spark lead, angle vs. time preacher-no choir 02/13/12 12:34 PM Re: spark lead, angle vs. time panic 02/13/12 01:55 PM Re: spark lead, angle vs. time stock49 02/13/12 10:01 PM Re: spark lead, angle vs. time tom jennings 02/14/12 04:40 AM Re: spark lead, angle vs. time preacher-no choir 02/16/12 01:10 AM Re: spark lead, angle vs. time tom jennings 02/16/12 05:58 AM Re: spark lead, angle vs. time Tony P 02/16/12 09:04 AM Re: spark lead, angle vs. time SCRAPIRON, #4711 02/13/12 03:22 PM Re: spark lead, angle vs. time preacher-no choir 02/14/12 03:54 PM