gentlemen, thank you for the unexpected responces. i have recently joined your group (#6038). and no i have no intentions of punching out the 292. the problem is i pulled all the tin and the motor is as dry as mother hubberds cupboard. the motor will not roll over with the little effort i put into it so now she sits with the bores full of diesel for a week then a very careful teardown to find the problems. my plan is to lighten up the rotating assembly,raise compression ( flatops), 600 holley, decent headers, and throw some money at the head. i don`t want to have to wring its neck. i want to use torque not rpm. thanks again.
