250 first start

12 Port News - Features

12 Port History

Casting Numbers

Online Store

Tech Tips

Become a Member

Print Thread

Rate Thread

Re: 250 first start wdschell #75267 05/24/13 12:23 AM
Joined: Apr 2004 Posts: 3,557 Likes: 36 Dysart, Iowa tlowe #1716 1000 Post Club
tlowe #1716 1000 Post Club Joined: Apr 2004 Posts: 3,557 Likes: 36 Dysart, Iowa	I did watch the video. Timing is only slightly off. That carb is not supplying fuel. Is it a mech pump or electric? You can prime the carb by dumping fuel in the vent tube. Remember 2K rpms for 20 minutes for the cam to break in. Inliner Member 1716 65 Chevelle Wagon and 41 Hudson Pickup Information and parts www.12bolt.com

Entire Thread
Subject	Posted By	Posted
250 first start	wdschell	05/04/13 02:00 PM
Re: 250 first start	THE FRENCHTOWN FLYER	05/04/13 10:36 PM
Re: 250 first start	wdschell	05/04/13 11:10 PM
Re: 250 first start	wdschell	05/05/13 06:27 PM
Re: 250 first start	tlowe #1716	05/05/13 10:39 PM
Re: 250 first start	bcowanwheels	05/06/13 12:53 AM
Re: 250 first start	wdschell	05/06/13 01:45 AM
Re: 250 first start	wdschell	05/06/13 02:40 AM
Re: 250 first start	tlowe #1716	05/06/13 09:23 AM
Re: 250 first start	wdschell	05/06/13 09:48 AM
Re: 250 first start	Winter	05/06/13 11:13 AM
Re: 250 first start	bcowanwheels	05/06/13 05:09 PM
Re: 250 first start	wdschell	05/06/13 10:58 PM
Re: 250 first start	wdschell	05/06/13 11:12 PM
Re: 250 first start	wdschell	05/06/13 11:50 PM
Re: 250 first start	DeuceCoupe	05/07/13 02:23 PM
Re: 250 first start	wdschell	05/07/13 02:37 PM
Re: 250 first start	DeuceCoupe	05/07/13 02:48 PM
Re: 250 first start	wdschell	05/07/13 03:21 PM
Re: 250 first start	wdschell	05/08/13 02:37 PM
Re: 250 first start	tlowe #1716	05/08/13 02:44 PM
Re: 250 first start	Mean buzzen half dozen A.K.A. Hank	05/08/13 11:33 PM
Re: 250 first start	wdschell	05/09/13 11:03 PM
Re: 250 first start	tlowe #1716	05/09/13 11:48 PM
Re: 250 first start	wdschell	05/10/13 12:16 AM
Re: 250 first start	tlowe #1716	05/10/13 11:08 AM
Re: 250 first start	wdschell	05/11/13 07:19 PM
Re: 250 first start	tlowe #1716	05/11/13 08:30 PM
Re: 250 first start	wdschell	05/22/13 11:04 PM
Re: 250 first start	Beater of the Pack	05/23/13 02:02 PM
Re: 250 first start	wdschell	05/23/13 02:28 PM
Re: 250 first start	CNC-Dude #5585	05/23/13 02:32 PM
Re: 250 first start	wdschell	05/23/13 02:37 PM
Re: 250 first start	CNC-Dude #5585	05/23/13 02:40 PM
Re: 250 first start	CNC-Dude #5585	05/23/13 02:42 PM
Re: 250 first start	wdschell	05/23/13 08:32 PM
Re: 250 first start	tlowe #1716	05/24/13 12:23 AM
Re: 250 first start	wdschell	05/24/13 02:04 AM
Re: 250 first start	70Nova	05/24/13 12:15 PM
Re: 250 first start	70Nova	05/24/13 12:16 PM
Re: 250 first start	wdschell	05/24/13 02:50 PM
Re: 250 first start	70Nova	05/24/13 03:19 PM
Re: 250 first start	wdschell	05/24/13 10:44 PM
Re: 250 first start	lowboygmc	05/25/13 12:08 AM
Re: 250 first start	wdschell	05/25/13 01:38 AM
Re: 250 first start	70Nova	05/25/13 10:01 AM
Re: 250 first start	tlowe #1716	05/25/13 10:13 AM
Re: 250 first start	wdschell	05/25/13 12:33 PM
Re: 250 first start	70Nova	05/25/13 01:01 PM
Re: 250 first start	wdschell	05/25/13 02:24 PM
Re: 250 first start	50 GMC	05/25/13 02:40 PM
Re: 250 first start	wdschell	05/25/13 03:51 PM
Re: 250 first start	wdschell	05/29/13 01:01 AM
Re: 250 first start	Sam Welch	05/29/13 08:23 AM
Re: 250 first start	wdschell	05/29/13 10:27 AM
Re: 250 first start	tlowe #1716	05/29/13 11:47 PM
Re: 250 first start	70Nova	05/30/13 12:28 AM
Re: 250 first start	wdschell	05/30/13 09:18 PM
Re: 250 first start	wdschell	05/30/13 09:22 PM
Re: 250 first start	wdschell	06/01/13 12:01 PM
Re: 250 first start	CNC-Dude #5585	05/23/13 02:31 PM

Moderated by stock49, Twisted6, will6er

Link Copied to Clipboard

Inliners International Forums General Discussion Engines 250 first start