307 piston pin height

12 Port News - Features

12 Port History

Casting Numbers

Online Store

Tech Tips

Become a Member

Print Thread

Rate Thread

Re: 307 piston pin height intergrated j 78 #79149 02/18/14 10:36 PM
Joined: Sep 2008 Posts: 3,669 Likes: 42 N. Georgia CNC-Dude #5585 1000 Post Club
CNC-Dude #5585 1000 Post Club Joined: Sep 2008 Posts: 3,669 Likes: 42 N. Georgia	Most aftermarket pistons are slightly shorter on the compression height to compensate for the rebuild processes such as overbore, head and block decking, etc...as to not let the compression or piston height to get out of control when its rebuilt. Class III CNC Machinist/Programmer

Entire Thread
Subject	Posted By	Posted
307 piston pin height	intergrated j 78	02/18/14 10:09 PM
Re: 307 piston pin height	CNC-Dude #5585	02/18/14 10:36 PM
Re: 307 piston pin height	intergrated j 78	02/18/14 11:07 PM
Re: 307 piston pin height	CNC-Dude #5585	02/18/14 11:27 PM
Re: 307 piston pin height	Lifeguard	02/20/14 06:58 PM
Re: 307 piston pin height	CNC-Dude #5585	02/20/14 07:44 PM
Re: 307 piston pin height	Lifeguard	02/21/14 12:27 PM
Re: 307 piston pin height	Winter	02/21/14 06:02 PM
Re: 307 piston pin height	Lifeguard	02/21/14 08:39 PM
Re: 307 piston pin height	CNC-Dude #5585	02/21/14 08:51 PM
Re: 307 piston pin height	Lifeguard	02/21/14 09:12 PM
Re: 307 piston pin height	Lifeguard	02/21/14 09:19 PM
Re: 307 piston pin height	CNC-Dude #5585	02/21/14 09:55 PM
Re: 307 piston pin height	Lifeguard	02/21/14 10:13 PM
Re: 307 piston pin height	intergrated j 78	02/21/14 10:28 PM
Re: 307 piston pin height	CNC-Dude #5585	02/22/14 01:34 AM
Re: 307 piston pin height	intergrated j 78	02/22/14 10:11 AM
Re: 307 piston pin height	Lifeguard	02/22/14 01:43 PM
Re: 307 piston pin height	Beater of the Pack	02/22/14 02:17 PM
Re: 307 piston pin height	Lifeguard	02/22/14 05:11 PM
Re: 307 piston pin height	Beater of the Pack	02/22/14 06:23 PM
Re: 307 piston pin height	Lifeguard	02/22/14 07:03 PM
Re: 307 piston pin height	Beater of the Pack	02/22/14 09:05 PM
Re: 307 piston pin height	intergrated j 78	02/23/14 12:40 AM
Re: 307 piston pin height	Beater of the Pack	02/23/14 01:56 AM
Re: 307 piston pin height	intergrated j 78	02/23/14 01:33 PM
Re: 307 piston pin height	Beater of the Pack	02/23/14 01:59 PM
Re: 307 piston pin height	intergrated j 78	02/23/14 08:18 PM
Re: 307 piston pin height	Beater of the Pack	02/23/14 09:00 PM
Re: 307 piston pin height	Lifeguard	02/23/14 10:05 PM
Re: 307 piston pin height	tlowe #1716	02/24/14 12:36 AM
Re: 307 piston pin height	Lifeguard	02/24/14 05:21 PM
Re: 307 piston pin height	CNC-Dude #5585	02/24/14 07:36 PM
Re: 307 piston pin height	Lifeguard	02/24/14 07:39 PM
Re: 307 piston pin height	Tony P	02/25/14 12:22 AM
Re: 307 piston pin height	intergrated j 78	02/25/14 06:36 PM
Re: 307 piston pin height	Twisted6	02/25/14 07:54 PM
Re: 307 piston pin height	intergrated j 78	02/25/14 08:23 PM
Re: 307 piston pin height	moregrip	02/25/14 09:06 PM
Re: 307 piston pin height	Twisted6	02/25/14 09:25 PM
Re: 307 piston pin height	moregrip	02/25/14 10:12 PM
Re: 307 piston pin height	Lifeguard	02/25/14 10:21 PM
Re: 307 piston pin height	Beater of the Pack	03/02/14 06:54 PM
Re: 307 piston pin height	intergrated j 78	03/02/14 10:08 PM
Re: 307 piston pin height	Beater of the Pack	03/03/14 12:30 AM
Re: 307 piston pin height	CNC-Dude #5585	03/03/14 02:29 AM
Re: 307 piston pin height	Beater of the Pack	03/03/14 01:50 PM
Re: 307 piston pin height	intergrated j 78	03/03/14 09:21 PM
Re: 307 piston pin height	Beater of the Pack	03/04/14 01:09 AM
Re: 307 piston pin height	intergrated j 78	03/05/14 09:57 PM
Re: 307 piston pin height	Beater of the Pack	05/15/14 01:38 AM
Re: 307 piston pin height	intergrated j 78	05/17/14 03:29 PM
Re: 307 piston pin height	Lifeguard	05/17/14 06:27 PM
Re: 307 piston pin height	tlowe #1716	05/17/14 10:38 PM
Re: 307 piston pin height	intergrated j 78	02/22/14 06:19 PM

Moderated by stock49, Twisted6, will6er

Link Copied to Clipboard

Inliners International Forums General Discussion Hi Performance 307 piston pin height