307 piston pin height

12 Port News - Features

12 Port History

Casting Numbers

Online Store

Tech Tips

Become a Member

Print Thread

Rate Thread

Re: 307 piston pin height CNC-Dude #5585 #79222 02/21/14 09:19 PM
Joined: Feb 2014 Posts: 505 Rockford, IL Lifeguard Major Contributor
Lifeguard Major Contributor Joined: Feb 2014 Posts: 505 Rockford, IL	Originally Posted By: CNC-Dude #5585 Most SBC 4 valve relief pistons have a 4cc combined volume. Make sure that the pistons you select do not have the chamfer around the top edge of the pistons either. What's the issue with the chamfer? Does it interfere with proper quench?

Entire Thread
Subject	Posted By	Posted
307 piston pin height	intergrated j 78	02/18/14 10:09 PM
Re: 307 piston pin height	CNC-Dude #5585	02/18/14 10:36 PM
Re: 307 piston pin height	intergrated j 78	02/18/14 11:07 PM
Re: 307 piston pin height	CNC-Dude #5585	02/18/14 11:27 PM
Re: 307 piston pin height	Lifeguard	02/20/14 06:58 PM
Re: 307 piston pin height	CNC-Dude #5585	02/20/14 07:44 PM
Re: 307 piston pin height	Lifeguard	02/21/14 12:27 PM
Re: 307 piston pin height	Winter	02/21/14 06:02 PM
Re: 307 piston pin height	Lifeguard	02/21/14 08:39 PM
Re: 307 piston pin height	CNC-Dude #5585	02/21/14 08:51 PM
Re: 307 piston pin height	Lifeguard	02/21/14 09:12 PM
Re: 307 piston pin height	Lifeguard	02/21/14 09:19 PM
Re: 307 piston pin height	CNC-Dude #5585	02/21/14 09:55 PM
Re: 307 piston pin height	Lifeguard	02/21/14 10:13 PM
Re: 307 piston pin height	intergrated j 78	02/21/14 10:28 PM
Re: 307 piston pin height	CNC-Dude #5585	02/22/14 01:34 AM
Re: 307 piston pin height	intergrated j 78	02/22/14 10:11 AM
Re: 307 piston pin height	Lifeguard	02/22/14 01:43 PM
Re: 307 piston pin height	Beater of the Pack	02/22/14 02:17 PM
Re: 307 piston pin height	Lifeguard	02/22/14 05:11 PM
Re: 307 piston pin height	Beater of the Pack	02/22/14 06:23 PM
Re: 307 piston pin height	Lifeguard	02/22/14 07:03 PM
Re: 307 piston pin height	Beater of the Pack	02/22/14 09:05 PM
Re: 307 piston pin height	intergrated j 78	02/23/14 12:40 AM
Re: 307 piston pin height	Beater of the Pack	02/23/14 01:56 AM
Re: 307 piston pin height	intergrated j 78	02/23/14 01:33 PM
Re: 307 piston pin height	Beater of the Pack	02/23/14 01:59 PM
Re: 307 piston pin height	intergrated j 78	02/23/14 08:18 PM
Re: 307 piston pin height	Beater of the Pack	02/23/14 09:00 PM
Re: 307 piston pin height	Lifeguard	02/23/14 10:05 PM
Re: 307 piston pin height	tlowe #1716	02/24/14 12:36 AM
Re: 307 piston pin height	Lifeguard	02/24/14 05:21 PM
Re: 307 piston pin height	CNC-Dude #5585	02/24/14 07:36 PM
Re: 307 piston pin height	Lifeguard	02/24/14 07:39 PM
Re: 307 piston pin height	Tony P	02/25/14 12:22 AM
Re: 307 piston pin height	intergrated j 78	02/25/14 06:36 PM
Re: 307 piston pin height	Twisted6	02/25/14 07:54 PM
Re: 307 piston pin height	intergrated j 78	02/25/14 08:23 PM
Re: 307 piston pin height	moregrip	02/25/14 09:06 PM
Re: 307 piston pin height	Twisted6	02/25/14 09:25 PM
Re: 307 piston pin height	moregrip	02/25/14 10:12 PM
Re: 307 piston pin height	Lifeguard	02/25/14 10:21 PM
Re: 307 piston pin height	Beater of the Pack	03/02/14 06:54 PM
Re: 307 piston pin height	intergrated j 78	03/02/14 10:08 PM
Re: 307 piston pin height	Beater of the Pack	03/03/14 12:30 AM
Re: 307 piston pin height	CNC-Dude #5585	03/03/14 02:29 AM
Re: 307 piston pin height	Beater of the Pack	03/03/14 01:50 PM
Re: 307 piston pin height	intergrated j 78	03/03/14 09:21 PM
Re: 307 piston pin height	Beater of the Pack	03/04/14 01:09 AM
Re: 307 piston pin height	intergrated j 78	03/05/14 09:57 PM
Re: 307 piston pin height	Beater of the Pack	05/15/14 01:38 AM
Re: 307 piston pin height	intergrated j 78	05/17/14 03:29 PM
Re: 307 piston pin height	Lifeguard	05/17/14 06:27 PM
Re: 307 piston pin height	tlowe #1716	05/17/14 10:38 PM
Re: 307 piston pin height	intergrated j 78	02/22/14 06:19 PM

Moderated by stock49, Twisted6, will6er

Link Copied to Clipboard

Inliners International Forums General Discussion Hi Performance 307 piston pin height