Inliners International Forums General Discussion Engines 215 Pontiac Head information

Hay Guys, newbie here from New Zealand.Hopefilly in putting this in the right forum. I'm trying to find some information on the 215 Pontiac (non ohc) cylinder head.

- will this head bolt to a 250 chevrolet 6?

- can any one verify the CC of the chambers? I've heard these are similar to a 194 head but haven't found any definitive info.

Thanks Guys and Gals in advance.

Cheers Craig

Can you give the part # from head? It will bolt on to the 250. They are usually a small chamber head.

Hi tlowe, Thanks for the reply.

Its quite hard to read in the photo but looks like its 3838021.

Reason im asking is i have 250ci chevy here in New Zealand. But believe it or not, they are quite thin on the ground here and I have a cracked head.

I have found a pontiac head in the USA and wondered if it would give me similar benefits to a 194 head.

Cheers Craig

The 215 has a small 3.75" bore, so I doubt it would have the large chamber head on it. More than likely it has the 194 chamber head on it, but just a guess!

Cheers could be a good option then

Cheers could be a good option then