I pulled a '60 235 out of a '51 Chevy (still with the torque tube). I need to remove the 3 speed trans, bellhousing, clutch and flywheel and am having a little trouble.
The trans and scattershield are off and the engine is on a hoist resting on an old tire. How do I get the bellhousing, clutch and fly wheel off?
There are 4 visible bolts in the housing, but 2 or more I can feel, but not see and can't get to with the flywheel in the way. I did this disassembly before on another engine but it seemed like a bad way to do it. What's the best way to finish this disassembly?