Inliners International Forums General Discussion Body & Paint rear panels 59 panel

Hi there all.
I am restoring my 59 chevrolet suburban limo,and need the rear quarter panels .
Is there anybody who knows where to get them, or repair parts .
Or used sheetmetal.
Any input welcome.

Thanks Wander.

There are lower rear fender patch panels for 55-59 2nd Series. to check out try www.goodmarkindustries.com. click Classic Truck Parts; click 55-59 2nd Series. Down the list, click on part number & it shows picture & price. There is a toll free phone # or e-mail for questions.

Dear Wander;

If that's a lemo your going have to fabricate almost everything.

I would look for a good fiberglass man.

Good luck, John M...

Hey there Old Newby
The goodmark patchpanels are realy to small, i need the complete wheelarcs.
Hey John
Fiberglass is not an option , the fenders has to be welded in.
Maybe somebody knows a junkyard with a panel or sub. where we can cut out the fender piece?
Any help welcome.
Thanks Wander

HI Propaneburner, I own a 58 Burb and also need those rear Quarter panels. I am a long way from using them so i havn't been looking too hard, just keeping my eyes open. What i might try is 62 to 66 fleetside quarters which you can buy. They come in two pieces from the center of the whell forward and from the center of the wheel back. Not too expensive for one piece to try. I think LMC and Brothers both have these panels. If you try this please post back on here if they worked.

Gael

You could try: Tom's Truck Parts in Maimi, OK.

There # is : (918)542-3871.

Good luck, John M....