|
|
Joined: Jun 2002
Posts: 26
Active BB Member
|
OP
Active BB Member
Joined: Jun 2002
Posts: 26 |
I have a 265 from a three ton truck,and it has a big honkin' dampner. Would one from a 251 fit,and work properly? Thanks.
|
|
|
|
Joined: Aug 2002
Posts: 18
Active BB Member
|
Active BB Member
Joined: Aug 2002
Posts: 18 |
You can switch to the smaller diameter 251 damper without any problems. Some 251's didn't even use dampers. I am running the larger diameter damper on my 265. As a matter of fact, I spent over a year looking for the larger damper and then had to send it to Damper Dudes to be rebuilt. I'd like to see a photo of your dampers to compare with mine.
A problem I have with the larger damper is that the stock fan and pulley cause the blades to hit the larger damper. From what I can tell, the larger damper was used on 265's that ran the dual carb and exhaust setup. Some of those 265's also used the sodium filled valves.
|
|
|
|
Joined: May 2000
Posts: 243
Contributor
|
Contributor
Joined: May 2000
Posts: 243 |
Hi T120
Is T120 like in Triumph Bonneville? Jim R
Jim - #2130
|
|
|
|
Joined: Jun 2002
Posts: 26
Active BB Member
|
OP
Active BB Member
Joined: Jun 2002
Posts: 26 |
I have in fact a 265 with the dual carb/dual exhaust,and was hoping to swap down to a smaller balancer. The engine will be going into a '51 Fargo panel in the near future. I am also hoping to be able to adapt an A-833 OD unit also. Jim R...T120 is not a reference to the Bonny,well,in my case anyway.Gotta love them old Trumpets!
|
|
|
|
Joined: Oct 2003
Posts: 98
Active BB Member
|
Active BB Member
Joined: Oct 2003
Posts: 98 |
I am in the process on installing a 251 CI long block flat 6 into a 1948 Plymouth. In order to squeeze this engine in I had to modify the harmonic balancer to skinny it up. I can send pictures if you like. Don Coatney
Don Coatney
|
|
|
|
Joined: Jun 2002
Posts: 26
Active BB Member
|
OP
Active BB Member
Joined: Jun 2002
Posts: 26 |
I would appreciate a pic...thanks.
|
|
|
|
Joined: Oct 2003
Posts: 98
Active BB Member
|
Active BB Member
Joined: Oct 2003
Posts: 98 |
Pictures have been sent. Let me know if you got them. Don Coatney [img]http://photo.starblvd.net/DonCoatney/1-2-1-1069863601?m=1&pg=0&ro=1&co=0[/img]
[img]http://photo.starblvd.net/DonCoatney/6-3-2-1072461198?m=1&pg=5&ro=2&co=1[/img]
[This message has been edited by Don Coatney (edited 11-22-2003).]
Don Coatney
|
|
|
|
Joined: Jun 2002
Posts: 26
Active BB Member
|
OP
Active BB Member
Joined: Jun 2002
Posts: 26 |
Hi Don...got the pics...thank you.
|
|
|
0 members (),
35
guests, and
29
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|