logo
12 Port News - Features
12 Port History
Casting Numbers
Online Store
Tech Tips
Become a Member
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Apr 2008
Posts: 196
P
Contributor
OP Offline
Contributor
P
Joined: Apr 2008
Posts: 196
I cleaned my Aluminum Bellhousing for my 4 speed with Degreaser then with Oven Cleaner. Now it has white spots like Oxidation.
I can clean that with a wire brush and elbow grease but then it comes back, what do I do?


250 Integrated Head / 1981 C-10 Pick up.
Joined: Nov 2008
Posts: 43
6
Active BB Member
Offline
Active BB Member
6
Joined: Nov 2008
Posts: 43
Without some type of protection bare aluminum will oxidize, clean and then clear coat, another option other then paint is having it coated, powder or a ceramic coating

Joined: Apr 2008
Posts: 196
P
Contributor
OP Offline
Contributor
P
Joined: Apr 2008
Posts: 196
What should I use to Clean the aluminum?
Is there anything I should look for at the parts store?


250 Integrated Head / 1981 C-10 Pick up.
Joined: Jul 2000
Posts: 1,613
G
1000 Post Club
Offline
1000 Post Club
G
Joined: Jul 2000
Posts: 1,613
sandblast it and coat it with Eastwoods Aluma Blast spray paint. Nobody will know its actually painted. Great stuff.

Otherwise, some hardware stores carry a "naval jelly" product that is supposed to clean up oxidation on aluminum. It's usually next to the silicone sealants, etc...


I.I. #3174
Joined: Sep 2004
Posts: 5,839
Likes: 1
M
1000 Post Club
***
Offline
1000 Post Club
***
M
Joined: Sep 2004
Posts: 5,839
Likes: 1
I believe you can use a wheel cleaner from Eagle 1 IIRC?

It is a mag wheel cleaner,works on oxidation,pitting etc.

It causes a chemicle reaction & you do not leave it on too long.

It will darken the aluminum if you leave it on too long.

I used this mag cleaner on my Webber DCOE carbs & it made them look much better than before.




MBHD


12 port SDS EFI
Joined: Apr 2008
Posts: 196
P
Contributor
OP Offline
Contributor
P
Joined: Apr 2008
Posts: 196
I couldn't find any mag wheel cleaner that leaves a protective film. So I just cleaned it with a wire brush and then coated it with Vasoline. Then I let it set in the hot sun. Then I wiped off the excess.


250 Integrated Head / 1981 C-10 Pick up.
Joined: Nov 2008
Posts: 43
6
Active BB Member
Offline
Active BB Member
6
Joined: Nov 2008
Posts: 43
Glass bead to clean and depending on what you are trying to do, it can be cleared, powder coated, or ceramic coated and polished, both powder coating a ceramic coating have a variety of coating colors, ceramic can also be polished, not a high gloss, simular to a set of cermic coated headers. I just usually clean mine up as best possible with some type of degreaser and just paint it gloss black.

Joined: Apr 2008
Posts: 196
P
Contributor
OP Offline
Contributor
P
Joined: Apr 2008
Posts: 196
I am kinda strapped for cash. The truck is my work truck, since it has been down for maintenance, I have not been working.

I do Demolition of small buildings. The truck has a Granny Low 4 speed. I hook a chain to the building and go to Granny Low.


250 Integrated Head / 1981 C-10 Pick up.

Moderated by  stock49, will6er 

Link Copied to Clipboard
Who's Online Now
0 members (), 350 guests, and 28 robots.
Key: Admin, Global Mod, Mod
Newest Members
Ehb86, OldFord777, Drachenblut, SSG Pohlman, castironphil
6,789 Registered Users
Sponsored Advertisement
Sponsored Advertisement
This Space is Available
Powered by UBB.threads™ PHP Forum Software 7.7.5