|
|
Joined: Jan 2010
Posts: 349
Contributor
|
OP
Contributor
Joined: Jan 2010
Posts: 349 |
Does anyone know if a typical SBC roller lifter (with the arms to tie them into pairs) will work in our 250 inlines?
I know that the cam lobes have a taper to make a standard lifter rotate, which is why I am thinking about the ones that are tied together... stop the rotation!
I am wrong to think that the roller would wear that taper off the lobes, in turn reducing the amount of lift? With that said, would it be best to get a roller cam?
Just a thought!
CHEERS!
|
|
|
|
Joined: Jan 2005
Posts: 2,123 Likes: 3
1000 Post Club
|
1000 Post Club
Joined: Jan 2005
Posts: 2,123 Likes: 3 |
Can't run roller tappets on any other cam.
|
|
|
|
Joined: Sep 2008
Posts: 3,669 Likes: 42
1000 Post Club
|
1000 Post Club
Joined: Sep 2008
Posts: 3,669 Likes: 42 |
Like panic said, only roller lifters can be used on a steel billet roller cam. No, SBC roller lifters will not work in these 6 cylinders, the link bars are too short and so is the lifter body, only roller lifters made for the 6 cylinders with the correct link bar length and body height will work in them.
Class III CNC Machinist/Programmer
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
IIRC, the iron Duke engine, Pontiac Fiero inline 4 engine uses the same lifters? They have the same spacing.
MBHD
12 port SDS EFI
|
|
|
|
Joined: Apr 2008
Posts: 5
Active BB Member
|
Active BB Member
Joined: Apr 2008
Posts: 5 |
Along the same subject. Any body know where to get a roller cam for a 250 six? I have been searching and can't seem to run across any vendors. I have found where I can get roller lifters and roller rockers (summit racing) but can't seem to find a cam. Any ideas? Thanks in advance
|
|
|
|
Joined: Oct 2009
Posts: 19
Active BB Member
|
Active BB Member
Joined: Oct 2009
Posts: 19 |
Try Lunati directly, I obtained a roller cam and lifters for a 292 from them many moons ago. If not try contacting the other cam companies directly since they don't catalog stuff for inlines but can supply them to order if billet blanks are available.. Summit or Jegs or any other supplier will not carry them.
Woody
Wise men talk because they have something to say; fools, because they have to say something. - Plato
|
|
|
|
Joined: Sep 2008
Posts: 3,669 Likes: 42
1000 Post Club
|
1000 Post Club
Joined: Sep 2008
Posts: 3,669 Likes: 42 |
Along the same subject. Any body know where to get a roller cam for a 250 six? I have been searching and can't seem to run across any vendors. I have found where I can get roller lifters and roller rockers (summit racing) but can't seem to find a cam. Any ideas? Thanks in advance Make sure the lifters are truly for an Inline 6 and not for the run of the mill SBC, they will not work. Crower has/had roller cam blanks on the shelf up until a year ago, if they still have any, be ready to spend close to $700 for just the cam, make sure you can get lifters before you buy the cam.....
Class III CNC Machinist/Programmer
|
|
|
0 members (),
35
guests, and
29
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|