Inliners International Forums General Discussion Engines Chevrolet 194 Hop Up

I`ve bought a 64 chevy 194 for my Hudson pickup.
Now i want to put some vintage speed parts on it.
Where can i find a 2carb intake,hedders and a nice valve cover.
I want a intake where i can use the original carburator so i only have to bye one more (-;

A old pic of the Hudson......

http://www.stoveboltengineco.com/index1.htm
http://cliffordperformance.net/

These two are the best known sources for speed parts.

Martin

That's going to be a sweet ride and unusual to see.If you click onto 12 Port Advertisers link on the RIGHT side of Inliners intro page,there are several suppliers for you to check.

Does the intake from a bigger chevy 6 fit the 194,seems as there isent so much parts for the 194.
Give me some basic info im new on the chevy 6 (-:

The way im thinkin i a 2carb offenhauser intake and valvecover.
Maby a preformence cam,and cast iron headers.
The Hudson will be 50s style Kustom so i want the old look..

The 1994 was free, but a 250 would be a better option. It will look the same as the 194 but have more torque and horse power. Parts may even be cheaper due to supply and demand. Joe

The external pieces and the camshaft for the 194 will be the same for a 230 or a 250. Worse case build the 194 and if you feel the need for more power, transfer the pieces to larger engine. If you want to mess with people's minds, get a 235 valve cover adapter from Stovebolt and use the larger old style cover.

Well i got i for a god price so i will use it and i wanted a 6 that would fit right on to a TH350.
And the original flathead 6 aint so fast.
Nice,then i can use a intake for 230 or 250.
Thats good if i want to swap for a bigger 6 in the future.