Inliners International Forums General Discussion Engines Drawings or Photos needed

I'm one of the developers for Street Rod 3, and currently I'm helping build the 3d models of engines for use in the game. Having a couple inliners myself ('50 Chevy Styleline Deluxe and a '51 Studebaker Starlight Coupe), you can be I'd definately want to see some in the game. Basically, I'm looking for good detailed drawings or photos to use for reference in making the model (Top, sides, front and back are needed). I've already hit the Rides and racing section and seen some that are good, but the more the merrier. First on my list is a Chevy 216/235, but I'd also like to have others like I6 Flathead Studebaker, Slant 6, etc to name a few.

If anyone can help, it'd be more than appreciated

Not sure if it is street rod material . . .

1952 Chevrolet 216 owned by a buddy of mine. We set it into the frame yesterday.

right side

left side

wow !!
Also , where did you get that oil filter housing fixed up at ? I have one I would like to put on mine in the future , But it needs work .
http://community.webshots.com/user/blunderbustr
Look in my online trucks folder for Another clean inline .

hey Hallmark You want some Pics of a 250 Block with 3 450 holleys sitting on it? headers and all?
and how soon do you need all this? }[oooooo]

Twisted, I'll take what I can get. And time isnt a big deal, although I'd like some stuff of a 216 fairly soon since i'm in the middle of making that one

To everyone thats given me images so far, thanks! You've been really helpful

well i can get some pictures from a single 4, dual
4s and my 3x4 as well I have all 3 intakes so it would only be a matter of swapping intakes. I can use the same Block for all photos. }[oooooo]

I have some pictures of a Pontiac 250 OHC with the Sprint option. The June 2003 issue of High Peformance Pontiac has an article on this engine with a belt driven turbo. If this interests you let me know.

firebirdst

A belt driven turbo ??????? Joe

They put a Powerdyne Centrifugal supercharger on the distributor side of the engine, producing 8-9 pounds of boost. The turbo uses sealed bearings and is driven with a belt of the crank. This arrangement produced 411 HP at 6000 RPM with 373 lb-ft of torqe at 5300 RPM, on 93-octane pump gas.

firebirdst

A slight correction of terminology - 'turbo' (or 'turbocharger') generally refers to an exhaust-driven centrifugal supercharger. The main advantage to this system is no mechanical horsepower is taken from the engine to drive the compresser

Twisted, you dont need to put it on the block, pictures of the different intakes off of the engine will work fine too.

Hellmark
No problem Just that it will be easier for me to take picture of the tunnel at least mounted to a head to help Hold it up But which every way you want them is not a problem.}[oooooo]

Do it what ever way you think would be easiest. I just thought that if ya propped up on a table, that would save ya alot of work.

I have a 1968 chevy inline 230 in my car. I can take pictures of it if you want.

Hellmark

I'll be doing some photos this weekend. I will have them for you soon. of all intakes single double & triple settups and with the 4b & 2b carbs would you like the Linkage in these photos? }[oooooo]

Hellmark,

Guess that if You care to ask the very same thing in the stovebolt.com the fellows there will also help you. Try slantsix.org, there are a bunch of cool pics of slant 6 there too. Talk to the guys, and they may also help you.

Twisted, thanks. things have been hectic here with my mom's wedding and moving, so I havent been able to get as much done as I'd liked to have. What ever photos you can get me would be great (cant have too much reference material).

Alex, thanks for the tip

well I did some dig. and hard photos so let hope they come out ok . So I'll start sending you some soon. I should have the hard prints tomarrow.I'll also have some up dated pics going to my web site
with the carbs and my linkage right along with the New Plates I have made. Which is the carb spacer & bell crank plate all in one.
Ps this may take a day or two to get it all put up But I'll let you all know. There will be some 2b & 4B pics all on the clifford intakes & mine
}[oooooo]

Sorry I havent been around much. Between my mom's wedding yesterday (was a groomsman), and having some problems with data corruption on my server (lost the mesh, so having to redo it), I've been busier than a three dicked dog.