Inliners International Forums General Discussion Hi Performance ford 300, 3 x 1 carb manifold done.....

well; "done" might be alittle stretch.
my friend finished Tig welding the pieces i made. it was bolted to a spare manifold for all heating/welding/post-heat/cooling.

plan on doing alittle port matching, then the first test will be to blank off end carbs and see how good it starts/runs with just a center carb. (one that currently running fine now)

any thoughts or ideas?

[img]http://www.pirate4x4.com/forum/attachment.php?attachmentid=304047[/img]

Got some pics? I've been thinking about building one up myself. What's it going in?

i linked a picture to the 1st post, can't you see it?
i'm building a 52 ford F-3.

hmmm, sorry bout that. i change the link alittle.
maybe a link to the entire page will work, http://www.pirate4x4.com/forum/showthread.php?p=6793226

another edit?
another link to a page i have, link will shut down if too much data transfer happens, but there are a few pictures of the manifold here http://www.geocities.com/ford52f3/78ford

links dont work, may wanna try photobucket.com

copy the URL

then in your posts

either click image, paste url, then click image again.

or

type [img] then paste url and then type out [/url]