Inliners International Forums General Discussion Drive Train t-5 to 292 fit

'84-90 Cherokee.


FWIW, the 168 tooth flywheel could be had with up to a 13" clutch disc, depending on application. That's why you need to measure...

Like I said, the pressure plate mounting holes in the flywheel are about 11 5/8 in. If I can get an 11" clutch to work there, fine. And I don't mind having to drill and tap new holes in the flywheel if that's what it is. Whatever happens, I only want to do it once.

I had the same trouble with a T-5 up to my 230 c.i. L6. I finally found Fort Wayne Clutch and Driveline, Ft. Wayne, Indiana. They made me a 10.5 inch disc with 1" 14 tooth spline for 40 odd dollars. Top job. Great, good people. I used a Pressure Plate from a '72 GMC pickup that had a staight 6, 250. But that clutch was not 14 tooth. Perley

Got a 1" 14 tooth spline 10 1/2 clutch disc for my '60 C10 235 w/ T5 from advance adapters, p/n 716104. http://www.advanceadapters.com

I wouldn't rush into shelling out big bucks for a spare plate if there's a cheaper standard one available that will get you out of trouble...