|
|
Joined: Jan 2012
Posts: 6
Active BB Member
|
OP
Active BB Member
Joined: Jan 2012
Posts: 6 |
I started building a viewable thermostat housing were you can actually see the thermostat work while the engine is running. I make several versions and would like to make them for inline engines. I have a question. Is the water neck bolt pattern the same for Chevy v8s and straight 6 engines.216,235 and 194-292. Chevy v8s are 3.25 inches center to center. My web page has one you can see working on a car if you want to see what it is. http://www.coolviewthermostat.comm
Cool-View The Viewable Thermostat
|
|
|
|
Joined: Sep 2004
Posts: 5,839 Likes: 1
1000 Post Club
|
1000 Post Club
Joined: Sep 2004
Posts: 5,839 Likes: 1 |
Sounds neat. Link does not work This one might http://www.coolviewthermostat.com/MBHD
12 port SDS EFI
|
|
|
|
Joined: Jan 2010
Posts: 493
Contributor
|
Contributor
Joined: Jan 2010
Posts: 493 |
have you had one on a car for a very long time yet? My concern is how long will you be able to see the "stat" before the coolant stains up the housing 'til you can no longer view it workings.
|
|
|
|
Joined: Sep 2008
Posts: 3,669 Likes: 42
1000 Post Club
|
1000 Post Club
Joined: Sep 2008
Posts: 3,669 Likes: 42 |
Yeah, its probably like those clear valve covers that were made back in the 60's. After a few cycles of hot oil sprayed on them they got hazy.
Class III CNC Machinist/Programmer
|
|
|
|
Joined: Jan 2012
Posts: 6
Active BB Member
|
OP
Active BB Member
Joined: Jan 2012
Posts: 6 |
have you had one on a car for a very long time yet? My concern is how long will you be able to see the "stat" before the coolant stains up the housing 'til you can no longer view it workings. The first prototypes I made were a year ago. All 3 are still on the trucks I installed them on and are driven on a regular basis. You can still see everything fine with no buildup on the inside of the glass. The viewable tube is made of steam boiler site glass. (Pyrex) The surface will not cloud up like plastic does. Also part of the problem with the see through valve covers is the oil builds a coking layer (burned oil) on the plastic. This doesn't happen with coolant.
Cool-View The Viewable Thermostat
|
|
|
|
Joined: Jan 2012
Posts: 6
Active BB Member
|
OP
Active BB Member
Joined: Jan 2012
Posts: 6 |
I started building a viewable thermostat housing were you can actually see the thermostat work while the engine is running. I make several versions and would like to make them for inline engines. I have a question. Is the water neck bolt pattern the same for Chevy v8s and straight 6 engines.216,235 and 194-292. Chevy v8s are 3.25 inches center to center. My web page has one you can see working on a car if you want to see what it is. http://www.coolviewthermostat.comm Update: Good news. I just talked to Tom Langdon and all of the 216,235 and 194-292 engines have the same water neck bolt pattern except a very few of the pick truck engines. Tom was very helpful, Thanks Tom.
Cool-View The Viewable Thermostat
|
|
|
|
Joined: Apr 2006
Posts: 831
Major Contributor
|
Major Contributor
Joined: Apr 2006
Posts: 831 |
I kinda like them, not sure if they have any real practical use other than being able to see if you blew a head gasket and you'd know that sooner just by driving.
'45 Ford PU 66 Valiant wagon, leaning tower of power. 79 Chevy C10 w/250 02 PT Cruiser Convertable
|
|
|
|
Joined: Aug 2003
Posts: 1,905
1000 Post Club
|
1000 Post Club
Joined: Aug 2003
Posts: 1,905 |
Yeah, but what a conversation starter.
Drew Mid-Atlantic Chapter
|
|
|
|
Joined: Jan 2012
Posts: 6
Active BB Member
|
OP
Active BB Member
Joined: Jan 2012
Posts: 6 |
Here is some more interchange information but for Mopars. I researched this information for the Mopar version I make but is good to know for interchanging water necks and thermostat on any Mopar engine.
Here are the basics. There are essentially two different water outlet bolt patterns used by all Chrysler engines from 1924-2003 . One is the older large size with a center to center bolt pattern of 3.25 inches. This pattern was used on all v8 engines from 1951 to 1978 and all flathead 4, 6 & 8 inline engines back to 1924. The thermostat diameter is 2.49 inches for this size housing. The other water outlet bolt pattern is 2.875 inches. This pattern was used on all slant 6 engines and the newer small block engines made after 1978. The thermostat diameter is 2.125 inches for this size housing. All flathead 4, 6, 8 inline, Slant 6 and V8s made before 1979 use 3/8 inch bolts. V8 Small block engines 1979 and newer use 5/16 inch or metric size bolts. Things get more complicated. Even though the 3.25 pattern is the same for all v8s from 1951-1978 many of the 1950s water outlets have bypasses built into the housing. This is also true of most of the flathead 6 & 8 inline engines. If you plan to change to a different water outlet on these engines it is important to know what the bypass did and is changing to a non bypass water outlet going to have an adverse effect. Bypasses are used on these engines mostly to keep from having hot spots in the cooling jacket as the engine comes up to temperature because the bypass recirculates the water in the engine. They are also used were the winter temperatures are very cold so the heater warms up faster. In addition some of the thermostats were constructed to work in conjunction with the water outlet’s bypass and use a different size Thermostat. Most of these thermostats are 2.55 inches. Some of the small block v8 aftermarket manifolds have both the 2.875 and the 3.25 bolt patterns which allow you to use either size water outlet. Also not all water outlets use the same size radiator hose.
Can you use Chevy water outlets on a Mopar? The 3.25 inch bolt pattern is also the same as the Chevy v8s and they can be made to work on a Mopar engine. However it should be noted that the recess for the thermostat on Mopar engines is in the water outlet and Chevys are in the intake manifold so using a Chevy water outlet on a Mopar is not a slam dunk. In addition the housing of the Chevy is about 1/4 inch smaller diameter so it doesn’t cover all of the mounting area and looks a little odd. The thermostat size used by Chevy is the same as used with the slant 6 and 1979 and newer small block v8s.
Cool-View The Viewable Thermostat
|
|
|
|
Joined: Jan 2012
Posts: 6
Active BB Member
|
OP
Active BB Member
Joined: Jan 2012
Posts: 6 |
Here are a couple shots on my brothers 51 Ply with one mounted on it.
Cool-View The Viewable Thermostat
|
|
|
|
Joined: Nov 2004
Posts: 123
Contributor
|
Contributor
Joined: Nov 2004
Posts: 123 |
That's pretty wild! One of my personal bad-luck items are thermostats. I don't think I've ever had one that worked the way I thought it should. LOL It's always cool to see things work.
|
|
|
|
Joined: Jul 2008
Posts: 183
Contributor
|
Contributor
Joined: Jul 2008
Posts: 183 |
OK, i'm impressed! :-) very nice! congratulations.
|
|
|
|
Joined: Feb 2005
Posts: 19
Active BB Member
|
Active BB Member
Joined: Feb 2005
Posts: 19 |
How much? I may want one.
If at first you don't succeed . . . er . . . then skydiving may NOT be for you!
|
|
|
|
Joined: Jan 2012
Posts: 6
Active BB Member
|
OP
Active BB Member
Joined: Jan 2012
Posts: 6 |
How much? I may want one. The price for the Chevy or Mopar units are $140 You can purchase them on my web site and all of the other prices are there too. Thanks for asking.
Cool-View The Viewable Thermostat
|
|
|
0 members (),
323
guests, and
48
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|