|
|
Joined: Nov 2011
Posts: 4
Newcomer
|
OP
Newcomer
Joined: Nov 2011
Posts: 4 |
I am starting a new turbo build. I have a t04e turbo, and I'm buying other parts to go along with the build. I was reading snowmans build and I noticed that his turbo has nipple in the front that has the boost refrence line from the fuel pump. I don't have this on my turbo and I was wondering where would I run my boost refrence line to the fuel pump, since I don't have the oney for a boost timing master.
|
|
|
|
Joined: Jan 2005
Posts: 2,123 Likes: 3
1000 Post Club
|
1000 Post Club
Joined: Jan 2005
Posts: 2,123 Likes: 3 |
Anywhere in the output side.
|
|
|
|
Joined: Nov 2011
Posts: 4
Newcomer
|
OP
Newcomer
Joined: Nov 2011
Posts: 4 |
Do I run the line from the modified fuel pump to the output side of the carb or the turbo?
|
|
|
|
Joined: Sep 2008
Posts: 46
Active BB Member
|
Active BB Member
Joined: Sep 2008
Posts: 46 |
From my understanding it could be either, it's just to detect the pressure people put then somewhere on the turbo piping from the turbo to the carb pretty commonly I believe.
|
|
|
|
Joined: Nov 2011
Posts: 4
Newcomer
|
OP
Newcomer
Joined: Nov 2011
Posts: 4 |
Ok seems sinple enough. Now where Do I start the oil supply line for the turbo?
|
|
|
|
Joined: Jan 2005
Posts: 2,123 Likes: 3
1000 Post Club
|
1000 Post Club
Joined: Jan 2005
Posts: 2,123 Likes: 3 |
|
|
|
|
Joined: Feb 2010
Posts: 136
Contributor
|
Contributor
Joined: Feb 2010
Posts: 136 |
x2. We were all new to this at some point and need help along the way, but please do some research, it will help you in the end. These builds are not your, off the shelf, bolt on's. Good Luck Boucher'
|
|
|
|
Joined: Feb 2009
Posts: 70
Active BB Member
|
Active BB Member
Joined: Feb 2009
Posts: 70 |
Spend a few hours reading this section. Bookmark pages and take notes. You can boost reference anywhere post turbo, some do it from the charge piping, some do it from the carb. Oil feed comes from oil psi fitting on the pass side of block. Addba T fitting and install a oil psi gauge in that spot also.
Best of luck.
Alex
|
|
|
|
Joined: Nov 2011
Posts: 4
Newcomer
|
OP
Newcomer
Joined: Nov 2011
Posts: 4 |
Thanks a lot for all you guys help
|
|
|
|
Joined: Nov 2012
Posts: 551
Major Contributor
|
Major Contributor
Joined: Nov 2012
Posts: 551 |
A few books that would help leo's book on chevy inline 6's and of you wanna get creating maximum boost by corky bell maybe a bluepritin book for some general knowledge don't know what you know
Best of luck! Stay inline!
Josh 72 gmc lwb air ride 5 speed (soon) turbo 292 II# 6102
|
|
|
0 members (),
452
guests, and
43
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|