Hi all, New here. Know a few members from purchasing parts. Not sure if I can upload pictures so I'll post videos if that's the case. Here's a description:
Head work:
1.94 intake 1.60 exhaust valves. 5 angle valve job.
z/28 valve spring
bronze guides
Lump ports
7/16 bbc studs
comp cams roller rocker 1.75 ratio.
.030 shaved off the head.
Block work:
.040 over bore. Ross racing pistons. Forged aluminum. 18 cc dish.
551 grams weight vs 742 stock.
Stock rods balanced and refitted with arp 350 sbc arp studs and bolts.
Crank shaft balanced and ground.
Block zero decked.
Smith Brothers pushrods.
Cam: comp 268 duration 219 @.050 .496 lift on a 110 lobe center.
Clevite bearings.
Melling oil pump.
And here are some videos of the engine. Thanks!
https://www.youtube.com/watch?v=fAEDaQRQrUQ