Good luck. I'm betting it will start.
Easy preliminary spark check. You can first look for spark like the guy in the video did. If you have a decent spark go for it. If no spark: With the battery & all electrical connections clean & tight pull the distributer cap. Turn the engine till the points are closed. Turn on the ignition and with a screwdriver push the points open. There should be a spark at the points. If there is no spark at the points it is a wire problem between the switch and the points. If there is spark at the points but not at the plug wire check another plug wire. If nothing again check the cap, rotor, plug wires & coil wires. Test the coil for resistance with a multi meter. Test the condenser. You'll have the read more online to do those.
