Oil, flat tappet cam failures, and what I learned

12 Port News - Features

12 Port History

Casting Numbers

Online Store

Tech Tips

Become a Member

Print Thread

Rate Thread

Re: Oil, flat tappet cam failures, and what I learned #12268 09/05/06 08:30 PM
Joined: Nov 2004 Posts: 420 Marble Falls,Tx SCRAPIRON, #4711 Contributor
SCRAPIRON, #4711 Contributor Joined: Nov 2004 Posts: 420 Marble Falls,Tx	I agree with John about valve springs. My 250 Chevy is set up with 55 lbs. on the seats and will rev to 6000 rpms easy, just about the time the hydro lifters start giving up !!! As a retired Shell Employee with a direct line to R/D I will find out if there are any changes in Rotella in the works.... SCRAP Jerry Davis II#4711 ol Smokey said "one test is worth a thousand expert opinions."

Entire Thread
Subject	Posted By	Posted
Oil, flat tappet cam failures, and what I learned	OldCarKook	09/05/06 08:14 AM
Re: Oil, flat tappet cam failures, and what I learned	RevOD	09/05/06 08:33 AM
Re: Oil, flat tappet cam failures, and what I learned	John H. Meredith	09/05/06 09:42 AM
Re: Oil, flat tappet cam failures, and what I learned	Drew, II # 4211	09/05/06 10:06 AM
Re: Oil, flat tappet cam failures, and what I learned	bob308	09/05/06 10:15 AM
Re: Oil, flat tappet cam failures, and what I learned	Mike G	09/05/06 06:27 PM
Re: Oil, flat tappet cam failures, and what I learned	OldCarKook	09/05/06 07:34 PM
Re: Oil, flat tappet cam failures, and what I learned	SCRAPIRON, #4711	09/05/06 08:30 PM
Re: Oil, flat tappet cam failures, and what I learned	jimmy six #35	09/05/06 10:37 PM
Re: Oil, flat tappet cam failures, and what I learned	RevOD	09/06/06 05:14 AM
Re: Oil, flat tappet cam failures, and what I learned	Diesel Dan	09/06/06 05:55 AM
Re: Oil, flat tappet cam failures, and what I learned	OldCarKook	09/06/06 06:41 AM
Re: Oil, flat tappet cam failures, and what I learned	John H. Meredith	09/06/06 12:17 PM
Re: Oil, flat tappet cam failures, and what I learned	SCRAPIRON, #4711	09/06/06 05:57 PM
Re: Oil, flat tappet cam failures, and what I learned	OldCarKook	09/06/06 06:11 PM
Re: Oil, flat tappet cam failures, and what I learned	Mike G	09/06/06 06:49 PM
Re: Oil, flat tappet cam failures, and what I learned	Diesel Dan	09/06/06 07:25 PM
Re: Oil, flat tappet cam failures, and what I learned	John H. Meredith	09/06/06 07:27 PM
Re: Oil, flat tappet cam failures, and what I learned	SCRAPIRON, #4711	09/06/06 08:56 PM
Re: Oil, flat tappet cam failures, and what I learned	TP from Central PA	09/06/06 09:21 PM
Re: Oil, flat tappet cam failures, and what I learned	jimmy six #35	09/07/06 12:02 AM
Re: Oil, flat tappet cam failures, and what I learned	TP from Central PA	09/07/06 10:04 PM
Re: Oil, flat tappet cam failures, and what I learned	jimmy six #35	09/07/06 10:43 PM
Re: Oil, flat tappet cam failures, and what I learned	C-Dan-D-Luxe	09/08/06 10:25 AM
Re: Oil, flat tappet cam failures, and what I learned	Dennis	09/08/06 01:49 PM
Re: Oil, flat tappet cam failures, and what I learned	gonzo	09/14/06 12:54 AM

Moderated by stock49, Twisted6, will6er

Link Copied to Clipboard

Inliners International Forums General Discussion Engines Oil, flat tappet cam failures, and what I learned