Thanks again for the replies.
So my plan is to put the 302 into the '37 chevy sedan and change to open driveline. The '37 has complete running gear, I also have the drive train from a '57 car with 6-cylinder including 3 speed OD, a separate saginaw 4 speed, some '61/62 1/2-ton PU bellhousings/flywheel/clutch parts, as well as the 302 bellhousing flywhell and clutch.
I'll use the '57 car rear axle which I believe is nearly a bolt-in to the '37 and the saginaw 4 spd or maybe the 3 spd OD. Not sure what bellhousing/flywheel/clutch combo I need but I certainly have lots of parts.
I guess this post should be moved to the drive line form?
