Kerry Pinkerton
First off I think your biggest issue is the Rockers,
Our L6 rockers are 1.75s That 1.5 is WAY!! to small Put the stock rockers on and then see how it runs.Or if you have a set of
BB rockers they are 1.7s and will work a 100% better then the
SB 1.5s
Do you know what the cam specks are?? Secondly seeing some of
the oter problems you have ran into.I wounder if someone Built
your motor with V8 rods This can cause a oiling problem if the
crank Or rod was done right You would have more bottom end bleed
off.????
But personaly I'd deal with your rockers first. And most cams
OVER a RV type like a little more idle rpms (then stock 800 rpms)
Hope this helps.
God doesn't like ugly.
