Oil pan - take 2 canyon I5 pans and cut/splice ...
Unless we have a pattern maker here or enough demand to invest the 80 hours it'll take to design the pan + $5000 to get the 3D model done, this is going to be a tough nut to crack.
Not hard to pull a plug mold off of a fab'ed pan BUT this won't work - doesn't account for thermal shrinkage when a poured pan cools to ambient from 1220*F - it'll be undersize.
Base map - done
Engine size/pix - I can do something once the engine is assembled.
EFI/Ign.. how to .... possible it would take more space than what we have here though..
Trans..
Canyon manual, '02 up 4l60E with the atlas family bell housing installed.
The black opel team used a SBC scatter sheild and redrilled it to match the 4200 block. The block-trans dowel pins are in the same location as any other GM 250/292 six. So with some effort any GM trans could bolt up - maybe someone with a Mill could figure out an adapter plate.
