spiderman Off hand i don't know of anyone who has the Heads Built and just sitting on a shelf. Because there are so many ways(combos) the head can be built. Because of the wide slection of cams. I don't even think Mike Kirby,PES has heads sitting around like that. They are normaly build on a as needed bases.I myself do not have heads sitting here that way. But I do have a few that are of the stock valving with the Bosses already Removed and In prep for the Lump ports. But like anyone else I/they will need the cam spects to set the head up for the right springs. I have been working on a head & cam Combo. And i am looking at more of a Hot Street combo/s with lumps installed. cams with a 500-550
(maybe a little taller profiles) lifts with stock Or 1.8 intake valves which will help keep some MPGs Over the 1.94 intakes But i would not give up a head with Out a Good Core(Head).Because to many are being crushed at the scrap yards.
Sorry Guys i will Not do business on the Board.
If you have any other Questions On this PLEASE Email me.
hope this helps }[oooooo]
God doesn't like ugly.
