maybe you should have started your thread by saying what you are wanting in a motor. we could have steered you in the right way to start with. 250's are easy to find. gm made them from 1967 - 1985?
you need a motor with a non integrated head (like the one you have), use pistons for a 307 chevy v8, rebuild the stock rods, pick a cam and do some serious head work.
these engines have a small aftermarket to support them and a wealth of knowledge held by the guy's that have done these for years.
maybe go to the CLUBB STUFF on the left side of screen and buy the INLINE 6 POWER mANUAL to get started.
tom
We'd have still been in the same boat, with me having 2 un-identifiable engines that needed to be identified (which we did), and then now subsequently, ruled out?
Didn't know what I needed in a motor, because I don't know what I had to start with, and there in was the rub. I could have been looking around for something I already had, but didn't know it.
The inline 6 manual sounds like good reading. Appreciate the tip on that.
