Hats off to:
GabbyP, RussK, Finger6 and Winter.

Samwise, there is still plenty of time. Date is still to be determined, but will be late Oct/ early Nov.

I am getting the heads worked up now.

RussK,
You are correct, too many combos to be tested, so this has to be very planned out and structured. There are only so many hours in a day and we have a big task at hand.
There is a two piece timing cover for easing cam swaps and a jig for lifting heads. All heads will have full stock rockers as to make swaps quicker. There are no multiple carb setups , just single 4 bbl's.

It will be CNC's job to put the article together and file out the info.

All contributors will get all documentation that I get and how each setup worked. The real inside scoop. I will also writeup the general feel for the combo's even for non contributors. Nobody will be left out. I do like to share. As said before, just trying to get real #'s to backup performance changes made. Tom

Inliner Member 1716
65 Chevelle Wagon and 41 Hudson Pickup
Information and parts www.12bolt.com