Found a small snafu when putting the Clifford 2 piece timing cover on. Pulled the timing cover from the 292 being used. Found the timing gear slid out on the cam! In fact , slid it off with my hands! Anyway, pulled cam and inspected, all looked well. Installed a new gear and will be reusing this cam during the runs.

Always drill and tap the crank gear for 2 3/8 bolts, it will aid at a later date when pulling the crank gear.

Hope to have it running tonight, the snafu slowed me down. Keep your fingers crossed. Tom

Inliner Member 1716
65 Chevelle Wagon and 41 Hudson Pickup
Information and parts www.12bolt.com