Inliners International Forums General Discussion Hi Performance Help needed to change 4 piles into 1

Under injection control

Try these settings:

hit req fuel and enter

engine displacement 350 (or 305 ) put the actual engine size in here
number of cylinders 8
injector flow 55 (if its a 305 try 45)

AFR 14.7:1

hit OK

It may scream an error at you ignore it until the next step is complete

set control algorithm to speed density
squirt/cycle 4
injector staging alternating
four stroke
number of cylinder 8
injector type throttle body
number of injectors 2

then hit burn and then cycle the power to the MS and make sure these have stuck.

Once this and the PWM setting are right your alomost ready to start.