How much more does the steering wheel need to turn before it hits the bump stops on the spindles.
bumps stops - is that the flat area pictured here?
if so, I have about 1.25 inches to go.
You can see how close you are to meeting those #'s with your pan, and it might tell you how much more you need to go.
I was pretty close eyeballing it. I had marked out an area that I thought I'd need to cut out and using the morose numbers, I was close. The green tape shows what would need to be removed according to moroso:
at the top edge of the green tape, you can see some blue sharpie ink on the pan peeking out from behind the tape. That's the area that I had marked out to remove.
