our suspicions are confirmed, I'm not sure how I came up with that 60°...must ahve been the wife yelling to hurry up...OKI redid everything including TDC just to make sure everything is right. I did both int and exh came up with the following:
lift at cam: .325int, .322 exh
Duration Int: Open 55°--Close 84°, comes to 319°duration and 104.5 ICL
Duration EXH:Open 76°--Close 60°, comes to 316° and 108°ECL
Cam LCA would be 106.25°...we'll just call it 106°. this as well means the cam is 2° advanced.
I did each step a couple times to get as close to real duration numbers as possible.
With those intake duration numbers i'm thinking a blower with this cam would give you quite a bit of fuel in your exhaust...
