If the devider/s moved & caused a restriction,that would not limit your boost,actually it might actully show an increase in boost.
Thats part of the reason why my Syclone makes so much boost, the heads are restrictive.
When switching to better flowing heads,your boost will drop & normally you would make more power w/less boost pressure.
So when you have opened up your head as you did,w/out changing anything else,you might have lost some boost pressure.
Tlowe Quote: "Even tightening up the WG provided no more boost"
When just tightning or adjusting your wastegate spring, that will normally only adjust your base boost pressure. "CarCraft turbo expert/guru. Get this Elky to run like it should.
My 3600 Truck (no driver) is on the verge of 11's,does not need a diet,just more boost! It's a street car w/A/C fully loaded.
Tlowe,don't you have an electronic boost controller?
