The pipes I metioned to get are from McMaster Carr,,they schedule weld els,no bending,just pieces to weld only,did you look @ McMaster Carr? Here are pics of the weldable fittings. http://sdsefi.com/techheader.htm
The exhaust manifold probably has a different location for the exit,but that should not matter. It bolts right onto your cylinder head.
If it has a 2.5" outlet ,then that is the correct one. Good price,jump on it if it has a 2.5" outlet or @ least close to a 2.5" outlet. You could also use these http://app.ecwid.com/image/3280809?ownerid=149402 (I wanted to @ one time) run the 2 pipes into one pipe before the turbo & have the turbo mounted on the passenger side to give you a little more room to play with.
