Thanks jalopy45.
I had 48 MM DCOE's,not knowing they are different lengths I just used the measurement given from the pic on the website you posted, So, I added the measurements from that website & came up with the carb measuring 4.66"
So w/the Clifford intake & carb bolted together equals a total of 9.66 inches.Does this sound correct?
I also had the oring isolaters which added approx .250"
[b]So I am thinking the carb set-up & manifold had a total length of 9.91 inches.
I also had a 1/2 inch plate aluminum w/radiused entry holes & a 1.5" plenum box bolted to the 1/2" plate.
So all that adds up to 11.91 inches from the cyl head.
That's quite a long distance & why I had to slightly move my master cyl over just a bit to clear my plenum box for when I had the Paxton supercharger on.
